Back in October 2009 I posted regarding my Ezee battery rebuild using Aldi NiMH C-cells. I mentioned that I couldn't fit them in the battery box, so I am going to overflow into a small extra box. Should finish that this christmas break and post some results/pics. Anyway - I promised to post a picture of the swollen Phy-lions in my existing battery - so here it is.
I have a question - I have taken the battery management electronics off the cells - does anyone know of use for same? I can't quite identify the chips because of the conformal coating on the pcbs.
It seems a shame to throw them in the electrical recycling bin.
BTW, I tried putting some charge into the cells, but some of them are showing less than 0.5V, so are completely useless.
Tony
I have a question - I have taken the battery management electronics off the cells - does anyone know of use for same? I can't quite identify the chips because of the conformal coating on the pcbs.
It seems a shame to throw them in the electrical recycling bin.
BTW, I tried putting some charge into the cells, but some of them are showing less than 0.5V, so are completely useless.
Tony
Attachments
-
54.7 KB Views: 46
-
67.5 KB Views: 39