Hi my Yose power kit turned up today. Still waiting on the 9 speed freewheel to arrive before I can complete the install but decided to get everything else in place, all going fine apart from the pedal assist sensor. Its an all in one unit left crack sensor ( KT-V12L ).
Its seems to fit on ok but once the pedal crank is back on and tightened up it seems there's not enough room for it. The pedal crank fouls against it meaning the pedals cranks are stiff to turn once in place. Is there anything that can be modified or is this simply not compatible with my bike - need to purchase a narrower sensor ?
Any pointers appreciated
actually looking at this photo it looks like its just to thick once the pedal is on fully ;-(
Its seems to fit on ok but once the pedal crank is back on and tightened up it seems there's not enough room for it. The pedal crank fouls against it meaning the pedals cranks are stiff to turn once in place. Is there anything that can be modified or is this simply not compatible with my bike - need to purchase a narrower sensor ?
Any pointers appreciated
actually looking at this photo it looks like its just to thick once the pedal is on fully ;-(
Last edited: