Hi pedelecs,
Anyone with experience of hub motor noise?
It sounds like a consistent but relatively quiet rattle. I've removed the motor out and the gear cogs could be more flush. There is a 2-3mm gap near the circlip which allows the gearing to give across the axle a little. See image attached. I'm wondering if that could be doing it?
Will a thicker circlip do the trick?
Your thoughts appreciated, as always.
Best wishes
Anyone with experience of hub motor noise?
It sounds like a consistent but relatively quiet rattle. I've removed the motor out and the gear cogs could be more flush. There is a 2-3mm gap near the circlip which allows the gearing to give across the axle a little. See image attached. I'm wondering if that could be doing it?
Will a thicker circlip do the trick?
Your thoughts appreciated, as always.
Best wishes
Attachments
-
2.1 MB Views: 16