Hello, as you see I've got myself in a bit of a tangle.
I believe to free my chain up I need to remove the 6mm bolt I've marked with a red dot, but it shows no sign of loosening after a good dozen half turns.
This leads me to suspect that I need to hold in place whatever is the other side of that bolt, but that's protected by a mighty shield of plastic, which is fairly close to the battery terminals.
I'm torn between pressing on with removing the bolt, which may involve removing more components or applying a touch of force to the chain to free it from it's current trapped position.
Any views most welcome. My last hardcore bike maintenance was Raleigh Grifter circa 1980
I believe to free my chain up I need to remove the 6mm bolt I've marked with a red dot, but it shows no sign of loosening after a good dozen half turns.
This leads me to suspect that I need to hold in place whatever is the other side of that bolt, but that's protected by a mighty shield of plastic, which is fairly close to the battery terminals.
I'm torn between pressing on with removing the bolt, which may involve removing more components or applying a touch of force to the chain to free it from it's current trapped position.
Any views most welcome. My last hardcore bike maintenance was Raleigh Grifter circa 1980