OK, there are no green cables.
So I connected red/red and blue/black.
Currently, I have connected both brake levers as shown in the picture.
But I assume that a missing connection cannot prevent the motor from turning.
These are active buttons.
When the brake levers are pulled, the circuit is closed and the motor cannot turn, I assume.
So I connected red/red and blue/black.
Currently, I have connected both brake levers as shown in the picture.
But I assume that a missing connection cannot prevent the motor from turning.
These are active buttons.
When the brake levers are pulled, the circuit is closed and the motor cannot turn, I assume.
Last edited:
