Hi
First post here but I have learnt a lot over the years as a lurker and yes it really is a combination of a pro connect frame/motor and agattu the rest.
I have a problem hoping someone can help if they have had a similar one.
Have not used the bike for a while and the last time I did it was heavy rain
came home washed it cleaned of the muck with a hose and put it the shed.
Now about a month later put the battery on the bike press the power button on the handlebars all the lights flash then go out, press again only lowest battery capacity flashes(but very dim) then goes out. Thought it might be the battery but charged them both up tested them put them on the bike same thing happened tested them again they seem ok. When I try to push the bike backwards the motor spocket locks the chain, but it will still works as normal when cycling without power.
Any ideas would be appreciated !
Cheers
Sid
First post here but I have learnt a lot over the years as a lurker and yes it really is a combination of a pro connect frame/motor and agattu the rest.
I have a problem hoping someone can help if they have had a similar one.
Have not used the bike for a while and the last time I did it was heavy rain
came home washed it cleaned of the muck with a hose and put it the shed.
Now about a month later put the battery on the bike press the power button on the handlebars all the lights flash then go out, press again only lowest battery capacity flashes(but very dim) then goes out. Thought it might be the battery but charged them both up tested them put them on the bike same thing happened tested them again they seem ok. When I try to push the bike backwards the motor spocket locks the chain, but it will still works as normal when cycling without power.
Any ideas would be appreciated !
Cheers
Sid