Hello
I received a replacement motor hub from Bmsbattery as the original failed after 200kms.
I think I can just disassemble both hubs and swap the internal parts rather than re-lacing the new hub into the wheel.
Does anyone know if the 9 pin waterproof connector will pass through the axle or do I have to de-solder the cable from the inner parts?
Many thanks.
Sent from my iPhone using Tapatalk
I received a replacement motor hub from Bmsbattery as the original failed after 200kms.
I think I can just disassemble both hubs and swap the internal parts rather than re-lacing the new hub into the wheel.
Does anyone know if the 9 pin waterproof connector will pass through the axle or do I have to de-solder the cable from the inner parts?
Many thanks.
Sent from my iPhone using Tapatalk