Hi.
I'm new to this forum. Question I have is,
Can a 250W 13amp controller support a 500W motor hub?
Thanks in advance
I'm new to this forum. Question I have is,
Can a 250W 13amp controller support a 500W motor hub?
Thanks in advance
It's complicated. the main characteristic that affects the controller is the motor's maximum speed in the air. A faster motor will draw maximum current for more of the time.Does the controller overheats easily on 500W motor
because it has to keep revving at 250W+ constantly?
.It's complicated. the main characteristic that affects the controller is the motor's maximum speed in the air. A faster motor will draw maximum current for more of the time.
If you got one of those large 500w direct drive motors, they're very inefficient at low power or low speed.
You haven't got enough current as it is, so turning it down will make it even worse. Your battery can probably handle 18 amps if it's healthy..
The stock lcd display is of similar programme as KTLCD3. Will lowering the max. current output reduce the overheating?
.
The only available 36V 500W controller in my local is of 18-25amps. Will my 10.4ah battery support this?