The image is more prounced to sight than camera.
Recent had “error 7” and swapped out the Hall Sensors. Although only took the bike on a test run of a few metres all is good no “error 7” code displayed. Bicycle is running smooth again.
Before that short test run 02 appeared with no “error” word only 02, see photo. Each brake was disconnected and the code displays when either one is connected and brake is deployed. Disengage the brake and the number disappears.
Regardless going out now on a longer test run, nought too hilly. Mobile phone near hand if a taxi a requirement.
Recent had “error 7” and swapped out the Hall Sensors. Although only took the bike on a test run of a few metres all is good no “error 7” code displayed. Bicycle is running smooth again.
Before that short test run 02 appeared with no “error” word only 02, see photo. Each brake was disconnected and the code displays when either one is connected and brake is deployed. Disengage the brake and the number disappears.
Regardless going out now on a longer test run, nought too hilly. Mobile phone near hand if a taxi a requirement.