TSDZ2 Open source

[suggy]

Just wondering if anybody has updated there tsdz2 with the open source firmware .
I think of doing it but a bit stuck of which display to purchase because I want to keep my throttle.
I have looked through the opensource website but could do with a step by step guide.
Cheers

 

[Nealh]

Look on Endless Sphere the guys on their are clued up and have a massive thread on it.

 

[TJS109]

Hi,
Did you look at this bit of the open source website https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/How-to-install-the-Flexible-OpenSource-firmware
because I don't think you will find more detailed instructions that these.

It is availible pre -built (loaded ) from here https://www.electrifybike.com/store/c37/TSDZ2_Flexible_Open_Source_Firmware_Products.html#/

I am going to have a crack myself when I have a bit more time

Tim

 

[Nothing2SeeHere]

I have. Been running it for a while now.

I can't remember much recent development with the throttle recently but there are a couple of forks of the old open source firmware which will definitely work. I ran one of these for a while but I much prefer the current versions

Out of interest why do you want the throttle? I used to use a throttle with a BBS kit when I had it but mainly used the throttle for getting going from junctions. The latest open source firmware supports both power without pedal rotation (push on the pedals and let go of the brakes to start) and coast mode (hold the button down to maintain the speed you are riding at - a higher speed version of walk mode)