Built up a bike with a 48v TSDZ2 and a VLCD6 display, noticed on a shakedown ride, that a couple of times on the ride the assist level kept dropping on the display.
Normally after reducing the assist level from say 4 to 3, the display would then drop to 1 or even 0?
Could this be a sticking button membrane? Possibly vibrations from the road bouncing the contacts or membrane on the display.
Checked all connections. Display, speed sensor and power, all tight!
Anyone experienced the same?
Ideas?
Normally after reducing the assist level from say 4 to 3, the display would then drop to 1 or even 0?
Could this be a sticking button membrane? Possibly vibrations from the road bouncing the contacts or membrane on the display.
Checked all connections. Display, speed sensor and power, all tight!
Anyone experienced the same?
Ideas?
Attachments
-
5.9 MB Views: 17