But just because you can fit on a bike doesnt make it the right size. Really, the Aurora is bigger than i'd like at 6' with a 33" inside leg. A typical mountain bike frame for the average 5'9-10" rider is 18". I usually ride 19-20" frames.
You need something like this. I'm sure there's other ones available if you look. It doesn't give the pipe size, but basically you need to "T" into your brake line/s unless you can find an inline switch with the right pipe connection.When the kit turns up I'm going to have a look at the switch set up in the supplied brake levers and see if it's possible to get it working with my existing hydraulic levers. Not sure if it's a simple microswitch or resistive, or whether it's even a feasible thing to do.
Is this the stuff you've gone for?Well, on the basis of all the feedback I've gone for the 350W 36v BPM front hub (no sensor) and 48V 16ah LiFePO4 battery.