Hi folks im new to ebiking just bought my first kit from amazon due to cost really not sure if they are of good quality its a 1000w rear hub conversion the donor bike is a Rockrider 520 brand new MTB
https://www.decathlon.co.uk/rockrider-520-mountain-bike-275-black-id_8350582.html?gclid=CKuUs-fhsdMCFVQ_GwodQu0PzQ#sXL?iv_=__iv_p_1_g_25792501736_c_93735726416_w_pla-163017921896_n_g_d_c_v__l__t__r_1o1x_pla_y_15177021_f_online_o_1864813_z_GB_i_en_j_163017921896_s__e__h_1007273_ii__vi__
https://www.amazon.co.uk/Voilamart-Electric-Bicycle-Conversion-Cycling-x/dp/B06XXQK2MD/ref=pd_sbs_263_6?_encoding=UTF8&refRID=722QA276710AEZJ46DCD&th=1
I have a few questions if anyone could help me
1.can i remove the rear gear hub on the motor wheel and use the Shimano cog from my Rockrider......
if not will the ebike supplied cog/hub cause any problems with the Rockriders shifting system Sram i think mine has 9 cogs the ebike kit has 7
2.also i would like to use my own brake levers as the supplied ones look and feel cheap what type of cable do i need is there a standard interface cable ? My brakes are disk mechanical i think
3.Will the Rear disk fit onto the ebike hub do they have standard fitting holes.....
Thanks sorry for all the questions i'm totally new to all this would like to fit the kit to the highest possible standards and safety guidelines.
https://www.decathlon.co.uk/rockrider-520-mountain-bike-275-black-id_8350582.html?gclid=CKuUs-fhsdMCFVQ_GwodQu0PzQ#sXL?iv_=__iv_p_1_g_25792501736_c_93735726416_w_pla-163017921896_n_g_d_c_v__l__t__r_1o1x_pla_y_15177021_f_online_o_1864813_z_GB_i_en_j_163017921896_s__e__h_1007273_ii__vi__
https://www.amazon.co.uk/Voilamart-Electric-Bicycle-Conversion-Cycling-x/dp/B06XXQK2MD/ref=pd_sbs_263_6?_encoding=UTF8&refRID=722QA276710AEZJ46DCD&th=1
I have a few questions if anyone could help me
1.can i remove the rear gear hub on the motor wheel and use the Shimano cog from my Rockrider......
if not will the ebike supplied cog/hub cause any problems with the Rockriders shifting system Sram i think mine has 9 cogs the ebike kit has 7
2.also i would like to use my own brake levers as the supplied ones look and feel cheap what type of cable do i need is there a standard interface cable ? My brakes are disk mechanical i think
3.Will the Rear disk fit onto the ebike hub do they have standard fitting holes.....
Thanks sorry for all the questions i'm totally new to all this would like to fit the kit to the highest possible standards and safety guidelines.