Search results

Might this work front pannier rack just need bigger clamps for suspension forks, have used exhaust clamps or an earth bonding strap before

The gap looks ok power the display on do not touch the pedals for 30 sec ,the torque sensor has to self calibrate every power up have you altered any settings other than the wheel size ? turn off the eu speed setting in the menu otherwise no assist above 15.5 unplug and reconnect all the...

Mid drive to power the rear drive is out as no diff fitted it will never turn corners under power without one As above the wheel chair kit is the quick way and a more practical conversion If you fit a mid drive to the front will not need more than a 250watt motor ,the speed hub will do all...

I have fitted a few which display do you have 0 is pedal assist switched off did you use brake cut outs have you fitted a throttle Does the speed sensor line up ? with the mark not the bigger end

You might need cable outers only cost a few pounds available off ebay in various colours, it will depend on if it is one piece or several sections of outer they have used cannot tell from pics

The plastic bracket is going to foul the motor :( ,so surface cables are the quick easy route [ should just need new outers ] and remove the plastic bracket :D Should be ok with the standard bafang bracket

Please can you post a picture of the bb tried to find a clear pic online but no luck I suspect you might have a problem unless you can reroute the cables externally

:(

That's the problem with early retirement to much spare time :) might get if completed tomorrow, if she who must be obeyed, does not find me another more urgent project or little job to do

Todays progress:D

That's the plan let the motor touch against the frame, and secure with the bracket and forget the rear one:rolleyes:

Found a shop soiled Voodoo Zobop 20 inch frame at the right price, it is newer model the colour is brighter in real life :cool: Removed the bottom bracket and the Tsdz2 slides in ok , the problem is the anti rotation device on the rear of the motor Time to make a bracket to fit on the side...

That is the same as a cube the allen bolts foul the bbs motor case I could not find a way to over come the problem

Post a picture of the bb ,have fitted a mid drive to a charge with a eccentric bb but could not fit it to a cube

Time for the B....T trade deal make the UK e bike central

Did I read that correctly 88% anti dumping tax:eek::mad: what a way to promote alternative transport

It is new old stock last one they had in 20 inch frame :p Hope I can remember what bits :oops::rolleyes: to fit might try the TSDZ2 this time it is even brighter in real life:cool: required

You should not need to go below a 42 the motor adds loads of torque if in doubt give it a try with the standard one , before you spend on the chain ring I know I said I would not do another fs bike but :eek:

try 1919 that's for the older one

The smallest dished I found was a 42 lekkie £ ouch:(