Search results

One end of what please ?

Where’s the bad attitude why are so interested To get these kind guys off the case

Good news and bad news . Good ... When I gently scraped at the alleged damaged tracks they are Ok And it’s only rubbish from the untidy soldering That made tracks look damaged Bad .... the motor doesn’t run with halls disconnected . But are you sure about that if somebody else set it up ? I am...

Good news and bad news . Good ... When I gently scraped at the alleged damaged tracks they are Ok And it’s only rubbish from the untidy soldering That made tracks look damaged Bad .... the motor doesn’t run with halls disconnected . But are you sure about that if somebody else set it up ? I am...

thanks . I guess use Plastic noT metal to scrape to avoid more damage . Only epoxy glue? No other glues or nail varnish ? I dint know whsts conductive or non conductive

In readiness for doing track repair can I ask.. I assume I have to remove a little of the green top layer to bridge A gap in the track ? Will the top layer come away without damaging the lower circuit ? If so what’s best way to remove top layer ? Can you beep test tracks ? What’s best way ? Can...

Somebody in this Forum must have bought from Ali. Speak up. anyway as I’ve said , ive put my battery from bike 1 with bike 2 and that’s fine for my use about 12 miles. that leaves me with bike number1 work in progress , with a battery that goes about 5 miles . So I think new battery purchase...

Stupid Ali site shows wrong results On mobile internet . On app I can’t share result from app

I guess so . The voila seeems smoother r from standing . The giant does e a little grating noise from standing . Anyway I’ll only switch on after I’ve pedalled off a bit

But really there’s lots .some are listed as Panasonic . ???? . It’s just a matter of choosing one that will fit in casing Simply putting 36v lithium in search will show them all . You’d know better than me which of these to consider the

Well that’s on hold. now anyway . Cos the duff battery is in the second bike I just bought . So I’m using battery from bike 1 which is ok . I’ll worry about another battery when I get bike going . . But dont know why you say false Are the reviews false too ? What u mean false ? They must work...

Thanks wheezy . While you’re there can I ask you ? My second bike I just got pedal assist only , motor kicks Immediately in with Any pedal pressure even When stationery . Is that ok? Thought it might damage motor if stationery Other bike you pedal quite a bit before it kicks in

Thanks so can I be sure . The white block disconnect all wires or only some ?

Just thought I’d status update 1. Bike cables and mosfets tested as ok . 2. waiting for solder kit to arrive to try and repair couple of broken tracks 3 when that’s done I’ll check motor without hall sensors as im advised it should work without ive got ss41s ready 4. Other thread about...

Where’s the hall sensor connector plz

Thanks For the link . But probAbly this is stupid question . Why canT I use existing charger ? Is it because it’s for a nimh ? With all due respect I won’t pay 300 for a battery For a bike that I got for 190 . I’ll make do with an ali battery for 50 .i assume I can switch the Charging socket...

Pic for 2. 4. And 5 Charging port is circular 3 pin so I guess I need a female for the single barrel charger supplied with battery. Or will it be attached ? All the battery plus charger sets seem to be barrel type

The controller is exact same one currently supplied with voilamart kits on eBay so not changing that

The controller is exact same one currently supplied with voilamart kits on eBay so not changing that

But it’s an upgraded voilamart front wheel Not the original giant so I assume whoever upgraded it fitted this controller too