Search results

Thanks so the only unknown is whether the Ali board Will work without the R1 and R2 components

Thanks but what about Q1 2 and 3 .

Yeh don’t mind taking a chance on that. But questions 1. I thought Somebody mentioned that mine didn’t have a speed sensor ? 2. What is a speed sensor purpose 3 Ithought the Only main difference with Ali board was the missing R1 and R2?? 4. How is the PCB removed ? Desolder or does it “unplug “...

Thanks . Won’t touch the board for now. I’ll follow the path you’ve all kindly given me. But I work so think the controller will be weekend . I’ll try your idea about removing sensors later but bear in mind photo on one of my posts /replies Where it shows possible damages circuits /tracks after...

Thanks . Just dont understand how the on/off / battery switch lit up if controller faulty but I’ll try . I hope I can access it from the. Chain side cos the other side cowling is a pig. I’m gonna do as you Say but keep thinking about the R2 that was blown and that it was the possible reason...

I’m not being impatient . People are complaining to me that I’ve not dine cable tests when I’ve posted 3 times that I’ve done it . anyway thanks for advice but need to point something out . 1. I’ve Done cross wire tests As advisedby VFR. Beep tested all wires against others . So I understand...

Think I’d better tell you that this bike has a throttle so maybe that blew R2. Also the on off battery indicator on handlebar switches on therefore receives power .

Cable tests are done cable tests are done cable tests are done . VFR still asking me why I haven’t done it . This is my third time of declaring that I’ve tested all for continuity and short and nothing detected

I’ve come to The conclusion that this forum is not very fluent at notifying replies to your posts . I’ve reported testing the cables at least twice now . They’re all ok and beep , there’s no cross beeping so no short . Can’t understand why you’ve not seen it .

A track didn’t blow . They were massacred by destructo and his terrible soldering . Wire tests show nothing as I said. And secondly , he did test R2 and it was dead. So maybe that acted as a fuse

Help you evaluate whether destructoa mods made any difference . He replaced aN unknown dead component at R2 With a 100 nF capacitor. He replaced the sensors without knowing what they were or if they were faulty, with 49 sensors which VFR says were wrong. And finally he destructively butchered...

Wires eliminated . I’m prepared to take on the PCB solder challenge cos nobody knows where to get replacement board that they’re sure of. So ss41?for sensors ? Then Only prob is R1 and R2 . To remind you R1 is the original whatever it is . But R2 is capacitor replaced by clever boy who was only...

ok that’s it !! All 8 wires have passed continuity and short test. Next please

ok that’s it !! All 8 wires have passed continuity and short test. Next please

Whoops sorry you did reply to this photo

R2 is a capacitor because dickhead fitted one without knowing what the original was

Look at the photo I posted of the board nobody has commented on it. I pointed out 2 yellow circles where it looks like the bad soldering fiend damaged the actual circuits. Am I right Or not? cos if so it’s a new board . Anyway I’m still to Beep check the last 3 thick wires

Once I can get back to the 3 thick wires and Test and eliminate them I’d prefer to find another board cos I posted a photo which nobody has commented on where it looks like the actual circuits have been broken by the crap soldering . Please look at that photo cus waste yo talk about what new...

Gotcha. So I’ve only tested for a break and not a short . Not there at minute I’ll check it later thanks