Search results

Some thing is not right if the seller is not answering, they are keen enough to take your money though. Afaict the kit isn't correct or plug and play. Consider a refund via ebay or your card supplier as it isn't correct. First make a couple of attempts via ebay to contact the seller and then...

Hubs motors are bullet proof usually, some folks have issues with hall sensors failing but I have not yet suffered so for the several years of ownership. The only issue I have had are noisy sealed bearings wear but a half hours maintenance and one can easily replace them for a few ££'s.

24v lion will be fine, controllers capacitor ratings are never that close to the battery voltage and if you were to peak in the controller one suspects you will find 50v caps in there.

Why folks don't ask first before making a purchase I don't know, as kt although mostly all compatible there are some weird component parts out there. For instance TBK sell the KT9 in a different guise, it has the throttle white wire on separate wire and connector from the lcd and not the...

The KT9 on the GBK page has a proper 6 wire jst connector with the throttle connected. kunteng kt lcd9 color display with intergrated thumb accelerator/throttle for 24v/36v/48v ebike-Greenbikekit.com online store for e-bike battery, Bafang motor parts, e-bike kit-GreenBikeKit.com Normal lcd's...

You will ned to contact the seller first, I've not seen that type of odd wiring set up before.

A great effort for spring and towing as well.

I can only think it is a customer custom option so that it is legal for EU bikes.

A link to the kit you bought ?

The lcd9 I have only seen a pic with 6 wire connector not seen one like yours. With all throttles the White wire is called the throttle wire aka the signal wire, I don't know why they have short/looped the power line. It appears to me although the lcd9 has a throttle the option on your...

I'm assuming it sounds like a scooter not unlike billybouyos one.

The cells may not have been balanced, it is possible they may have discharged a bit so were able to accept some more charge. With out knowing the voltages before and after it is pure guessing that this is what has occurred. Before one does connect the battery make sure polarity is correct first.

Drums doh, I should read things properly. Even so the same applies for drum shoes the surface may be very shiny or warn though the material.

Look at the pads are they very shiny or low on wear ? If very shiny try lightly sanding the surface or replace them.

Not the pics I wanted. We need a pic of the KT9 and the white wire and a pic of the PAS.

From what I have read form various places E10 comms error usually means the display is faulty, it appears the s866 is hit and miss when it comes to QC.

Show us a pic of the kt9 wiring. I have seen on TBK there is a white throttle wire to a separate connector but the pic isn't clear. For PAS you have to let us know which PAS sensor designation/type is used.

Carefully check the wheel rim internally for anything sharp, be careful in case of slicing a finger esp on the rim edge. Also some times the object may still be imbedded in the tyre, though one can't necessary feel it one may have to manipulate the tyre to see if they can see a split/hole in the...

With most simple generic batteries there is a often a simple work around. Recently someone had a folding bike acquired wanting a battery, a few pics , suggestions and a bit of simple diy and they had a working bike for little over £120. Though the same style battery couldn't be found a...

Gone are the days when I rose from a tent with a hard frost on the ground. I remember four of us one year waking up in Harrogate in the new year during the 80's, over night must have been -6 or so. The lady where we camped refused to take any payment saying any one brave enough to do so was...