Search results

  1. Nealh

    Looking for a Road/Gravel eBike with/without Throttle

    That said I bought a Pinnacle arkose 2 from evans for £800 and added the Revos friction drive kit to the bike with 208wh battery for a 25 miles range a 2nd one gives me a nice 50 mile outing.
  2. Nealh

    New to cycling and looking for an ebike

    Tbh looks like you are sorted albeit waiting on the Camino delivery date. The Camino at half the price of your top end figure will do everything that a 2.5k bike will do . The one thing you will get is very good or should I say great help and CS from Woosh. Another brand to look at if the wait...
  3. Nealh

    What do you use for cell welding?

    I use the Malelectrics one, even these mini/micro welders one has to be watchful of the heat build up. Though they do have an integrated fan. The key with these is to buy a quality high 65C rate 4 -5ah lipo.
  4. Nealh

    Bike seat for long commute ?

    The lidl medicus gel saddles at £9.99 (or were) are relatively cheap to try out, they come in 3 sizes narrow , trekking or fat bum style. I use the trekking and find them pretty good for my 160k rides. Though any amount of long time spent in the saddle will start to become uncomfortable unless...
  5. Nealh

    Cheapest source for kt controller and display

    Mine is older firmware I don't think I have a C4/4.
  6. Nealh

    Cheapest source for kt controller and display

    No, throttle is all or nothing so 100%.
  7. Nealh

    Bike seat for long commute ?

    Wrist issues can be down to the type of bar sweep , swept bars offer best hand placement with 40 deg sweep about ideal for wrist position.
  8. Nealh

    Hi to everyone!!

    Welcome Charles, it's a shame you joined to late for advice as you might have saved some money. The original battery could have been re-celled with lithium cells to make the mid motor work better. Adding another motor and battery will make the bike so much heavier.
  9. Nealh

    Electric battery revamp

    How do you know one cell is bad ?
  10. Nealh

    Help! Onebot No throttle pulling issue

    If walking the bike simply switch it off, then nothing can activate. My bikes have a zero PAS setting.
  11. Nealh

    Battery on Wisper 905se only charges to 50 percent

    Something quite not right then, it should be north of 41.5v. What voltage reading does the charger give on it's own ?
  12. Nealh

    Woosh Sirocco PAS not working

    That's the beauty of SM connectors the pins are stronger so not easily damaged unlike Julet pins, also damn site better if ever needed to take voltage readings.
  13. Nealh

    Council recycling centre bike access

    Our tip only allows booked visits from West Sussex registered resident's, can often book a next day appointment. The waiting time is now slashed and I was straight in this morning and out within a dozen minutes. One old rotten shed and felt roof got rid of and some garden waste.
  14. Nealh

    Council recycling centre bike access

    Our site is run by Viridor no pedestrians of bicycles are allowed at all, to get tot he tip now one has to book a time slot online. We are allowed 5 visits per month.
  15. Nealh

    Cutting the pedal assist cable

    Why would you cut the cable ? Just unplug it. More the issue why is it driving you nuts ?
  16. Nealh

    this is really a big problem. The electric motor touches the brake. Please advise.

    As you have the front one working then , no need to fit both. the easiest option for brake sensors with cable brakes is to use a pair of the integrated brake levers cost about £15. One simply replaces like for like.
  17. Nealh

    Change bikes

    Depending on the gap the mag ring could be epoxied tot he crank on the LHS.
  18. Nealh

    Yamaha Sideswitch Display A strange behaviour

    Return to the dealer, one shouldn't need to be fault finding a new bike.
  19. Nealh

    Woosh Sirocco PAS not working

    If you have a meter test the PAS wiring if possible to see if a fault shows up, the one can stop guessing at the issue. Place the probes up the back of the PAS connection & on V+/Red and V- /Black one should see 5v. Next place the Red probe on the other wire/Signal, rotate the cranks and the...