Search results

I believe the trial scooter fee comes has insurance included .

Good to here some forces/courts are acting on the nuisance. Now having lost their licence's they will probably be more of a nuisance by using these toys all the time now, having lost it once they can't lose it again except for a longer duration.

P5 is for the battery bar damping on the screen, it doesn't affect current or power delivery.

You haven't answered the Q about the Yellow WP connectors, are they the same brand ?

If buying the battery on AliExp might as well get the KT controller and display as well. Fir the battery connection the bullets can be a bit crappy and the shroud protectors eventually melt because the bullets tbh can't handle the heat. For battery connection opt for #2 Anderson Powerpole or the...

Possibly a frog type battery mounted, or one can use power tool base plates in the link to mount said power tool batteries. Makita 18V Li-ion Drill Battery Cable Connector Output Adapter Tool For BL1850 | eBay Mount a pair and wire in series and use 18v Power tool batteries, one will need an...

As above can you confirm that the make of the Yellow W/P connector are the same brand, brand name should be embossed on the black sleeve. If one is Julet and one is Higo then no one won't work as both brands use a different wire sequence.

Both should work. Try changing the PAS value of C1 use 00 -02 or 05 -07. I think your DH means double hall so try 05-07. The V series I think are double hall and this is the value for them. Instead of fitting the PAS, first up turn bike or use a bike stand. Plug the sensor in and pass the disc...

The sensor bracket/ring will clamp behind the threaded retainer, the magnet ring will have to be secured to the inner chain ring.

A blank display usually means no power to it. Some KM displays have a back up battery, can't remember now if this is just for time etc and whether it actually affects the operation. Check the battery discharge voltage in case the internal or external accessible fuse has blown.

At 39.4v I wouldn't charge higher as not be used but a 5 minute whip round the block is all that is needed for now.

All the KT's I see are dual voltage. It took less then 5 seconds to find these. Electric Bicycle KT Controller 36V/48V Sine Wave 15A/17A/22A Controller for Ebike 250W/350W/500W/750W Wheel Hub Motor|Electric Bicycle Accessories| - AliExpress And another 15 seconds to find all of these. KT...

Tbh I would go the other way Flecc and fit them to the bike and either fire the bikes up on PAS or actually take the bike around the block once just to wake everything up. As long as voltage is at or above nominal I see no need to charge any more.

I'm one of the 3 % who is discriminated against.

Black wire is the Gnd , Red is 5v, Blue .Green, Yellow are the halls and White is the speed sensor. If the controller has no speed wire connection then one will have to for go it. All hall colours mate colour to like colour with only the Blue, Green & Yellow which sometimes need swapping if...

There is more then one AliExp shop/vendor that sells KT controllers as well as other third party sellers.

No one can say how or why the fire started, without knowing the bike or battery used. If diy then the reasons may be more clearer.

n

My Gravel bike Arkose 2 set up for day touring with Revos drive. Vachery / Chelwood Gate dscf0980-jpg.32068 (640×480) (pedelecs.co.uk) Ardingly Reservoir. dscf0976-jpg.32067 (640×480) (pedelecs.co.uk)

For reference Black are Gnd , Red are 5v and Gr/Wh are the signal wires.