Search results

Your hub and controller are sensored/sinewave, you have the DJ7061 white connector block with the six very thin sense wires connected.

According to our resident member Andy over in Germany the Eric's on Pedelec.de slate them terribly for reliability and CS.

How many motor wires ? Unsensored = 3, sensored 8 or 9. With KT a sensored model has 6 thin wires in to a white square connector block. .

They are woefully illegal in this country and most of the world. I saw the start of a programme where a family had relocated to Portugal and they were starting up a an ebike hire business and the Rad and some other ghastly looking 750w bikes were part of the fleet, depending on how the local...

The down change may need the derailleur stops adjusting so the gears aren't clunky, it's likely they weren't set up properly in the first place.

Yes, perfect for geared hub. What is the controller current rated for ? Is the KT sensored ? As you have found out D/D hubs are pig to ride unpowered a geared hub will allow unpowered riding though hills will still be energy sapping.

By whom and where ? There are many of us on here who won't touch them with a barge pole.

Lets see if we can rule out any cell group anomalies with a series of 10 cell readings.. 4010.JPG Disconnect the multi sense wire connector, 1 x red, 9 x White and I think I can see 1 x Black on the very end. With your meter (set to 20v)place Black probe on the Black wire pin and the Red on the...

What you are seeing is moisture corrosion on the copper contacts, the cutting out is due to bad contact with them. Clean with wire wool or very fine emery paper and use some Vaseline to prevent corrosion.

The best unbiased resource is the ES cell aging thread, the guys over there go to great lengths and post stuff that you simply don' see elsewhere.

BZ -10 is perfect and compatible simply set C1 to 1.

Switches on Page 6 & 7 in the link. Motor cable,anderson PP connector,XLR connector,air connector (topbikekit.com)

The cold doesn't affect the lithium life, the only thing that affects batteries in the cold is charging. Charging in the cold simply reduces the cells ability to accept full capacity though voltage will say full, once the battery is returned to warmer charging temps it will then accept the...

If capable source and replace the switch your self, ask the vendor to supply said switch. Sending batteries via courier is tricky, they have to be boxed and labelled correctly. Get it wrong and battery won't see light of day again, that's if you can find someone as a private customer to take it.

There have been a couple of others who have had similar issues, it is likely a lea fault. Return it and buy from another vendor. There are so many now and at varying prices, it is hard to pick where to buy Danield of the forum sells them at Torque tech. Bafang 8Fun Programming USB to TTL Cable...

Good for the muscles and toning !!!

I have had the odd occasion when I'm glad to have had them, but sods law happens if I they aren't taken. The space they take up is minimal.

Your old controller & hub are square wave /unsensored the motor only has 3 thick wires connected, the Brainpower controller is for sensored hubs / sinewave. Sinewave/sensored hubs have 3 thick wires and 5 or 6 thin wires for sensors. Not all sinewave controllers will work with unsensored hubs so...

For the price of a new KM lcd a new controller and lcd3 will be as cheap. German sourced one.Web Translator (translatetheweb.com) One could very nicely ask Hatti at Woosh bikes if they have any spare or old units available.

Woosh bikes for 250w 48v tsdz.