Search results

Show some clear pics of the of the wheel installation and bike itself. The issue only occurring under load of rider weight ? Check the frame hasn't cracked anywhere the drop outs, BB welds and the rear stays/frame. D/D hubs if not fitted very well will crack dropouts.

Likelihood are the cams/stops are worn if after cable adjustment is correct and still not changing up or down. My Boardman started to suffer poor changing so I ditched the Shimano XT in to the scrap bin and fitted a new £12 Sunrace triple dual pull and the difference was/is far superior, the...

Why can't the front triple be used ? I have had triples on more then 3 ebikes that worked fine.

One can also check BMSBattery and Greenbike kit.

Swap the controller and lcd out for KT with LCD3 or 4. One may well have to play with some wiring but we can help you out with that.

Kudoscycles still have sub 1k step thru's available the Safari albeit heavy is excellent value.

Doh !!! Even still as little chance of getting/finding one alive.

I have only ever seen two in the flesh .

Topbikekit have the AKM 100cst or the AKM 100sx (freewheel) both 250w, if you aren't too heavy say sub 75/80kg it should be alright run with a KT 17/18a and it will be better then the Yose kit

The old recelled battery is of no use as it is, the new cells though will be of value. They can be wired to any generic BMS to power most other generic China hub bike or a kit mid drive bike. The battery can't be fitted with a new Bosch BMS.

One doesn't need to open up the battery. The receiver it sits in has the discharge prongs or pins , open the combo base/controller and and carefully solder a pair of wires to the internal pins, they will then exit the controller via a grommet the wires only need to be thin. 24awg is good for...

Take both feeds from the battery base receiver, a V+ & V-. Wire the lights in parallel and connect the battery V- to the lights V-. V+ via an inline fuse and a switch to the V+ of the lights (again wired in P) . For front light use a 6- 60v or similar with inbuilt voltage converter and a...

If disc brakes fitted fitted check the rotor fixings aren't too long, some hubs don't have blind holes so the bolts can rub/catch on the internals. Sometimes the rotor may be catching on the calliper but this is often a ticking noise, also check the actual calliper attachment as it may be that...

Any Bosch battery not more then two years old and the dealer has to offer a replacement FOC, after contacting Bosch and activating the warranty process with them. Any dongle remove all evidence and keep your trap shut, they are not detectable as far as it is known.

The controller will most likely be China/Far east made, the Dutch BV name is just the customer name and not the producer.

It won't be just the main inrush cap or fet that has been damaged likely some other components like resistors or diodes are toast as well or even the main memory chip. We have seen the Yuan lang's mentioned a few times and they are like most simply OEM only, you won't find one on any web site...

I run Gaadi's permanently.

It ok if you like dealing with mess to clear up when it doesn't work.

GH likes to keep his warm.

4k could buy 3 or 4 good Woosh bikes.