Search results

The throttle is sorted then you can use any controller with throttle out put, Red/5v, Black/Gnd and White signal/Hall wire. The brake should be ok to sort out and the lights shouldn't be a problem now as you have mentioned a switch is utilised., my 700c commute/town bike has a handle bar light...

He's at it again copying and pasting replies adding nothing more to the thread, unless one has anything useful extra to add then don't bother replying with copy an paste.

The 14a model will be fine though if you wanted a bit more power the 22a will be ok if your battery can output 22a continuous, both support throttle use. If you scroll down the screen on the AliEx link the info which the displays/LCD's show are listed, the listed info is quite comprehensive on...

Has Hatti broken her spokes as well :p.

Certainly not original is he this new guy !!!!!

Back is down to posture and in the same position for too long. Comfy chairs/seats can be detrimental for posture. How and ware does your back hurt ?

Same poster who copied one of my posts four or five days ago, someone who hasn't got a clue but likes to cut and post. It doesn't make the individual look intelligent.

Could be a controller fault or conflict between the throttle and PAS, disconnect the throttle and use PAS only for a while. If no fault occurs you can rule out PAS, do the opposite and see what happens with throttle only and just pretend to pedal. If individually no issue arises then the fault...

A 14a Lishui controller with lcd's or 22a with lcd's. The only difference is brakes 3 wires & throttle std 3 wires. https://www.aliexpress.com/item/4000926754587.html?spm=a2g0s.8937460.0.0.69042e0epbp3jK The only issue you might have is throttle and brake compatibility, you would simply have to...

Should be no noisier then any other, they can become noisy if grease is lacking on the planetary gears or if a bearing starts to wear then the noise can resonate quite a lot. If it is an electrical clicky noise then it resonates via the controller and can be bad phase connection contacts or a...

You will probably have to get a 36v 15a Lishui controller and lcd or a KT controller and LCD, finding an Ananda will be very difficult.

3 thick are motor Phase wires & 5 thin are motor Hall wires. 2 thick to battery = battery supply wires. 3 thin to lights are just that. 5 thin to handle bar are digital display wires for led or lcd not controller. Brake wires are for Reed switch a simple on/off sensing switch. 3 thin to...

Currently bidding at £860 on the Bay.

Louise they use standard generic KT/Kuenteng electronics you can use any 10 pole PAS disc/sensor for about £10. As I mentioned in #7 above you just have to get the wire sequence correct we can tell you how. If you need one with the moulded Julet waterproof connector just say we can find you...

Simon get them SNAIL brand (104bcd) direct from China via Aliexpress sellers, they are 4 or 5 X cheaper then the same ones on Ebay where British sellers mark them up for profiteering. I recently received my two a 42t & 32t each one under £4 each, both arrived within 14 days. See pic #18 on the...

Loose unused connectors are best heat shrunk.

You will pay duty and vat plus the courier process fee which will likely be DHL, FedEx etc,etc. Courier fee is usually flat rate at about £12. Depending on the duty to pay depends on the HS code for the item (HS/Harmonised system code used world wide for products).

I just carry a small mighty mini morph pump much cheaper and easier.

For my battery/controller compartment I have designed it along the lines of the Aluminium and plastic case design from my Swizzbee for making in GRP. The top section (center rib section) will have 2 or three layers of 300gsm matting applied to the exterior of the shape and will be approx. 80mm...

Like Kyle from the Black Forest I am also going to make a triangle box for my controller and 10s lipo's. Also have mocked up the stiff card box which will act as the moulds for the GRP, maybe in a weeks or two's time when I have a bit more time. When cured and finished I can rattle can them for...