Crank removal

[Sparksandbangs]

Show a picture of the whole thing that fits on my page so that I can see what it is. I can't see any of your other pictures because they're too big.

Top picture on post #58. I reproduced the picture.

FP-B917/9N
L: 135.5
C:29
L< 84 >R
BC 1.37"x24T

 

[saneagle]

Top picture on post #58. I reproduced the picture.

FP-B917/9N
L: 135.5
C:29
L< 84 >R
BC 1.37"x24T

All I see right now in post #58 is a label.

 

[volt x]

I maybe being stupid by the picture posted has 84 where it usually says 68. I'm well out of my knowledge range here so will leave it to others to confirm.

View attachment 63768

Halfords example. Funnily enough same make.
View attachment 63769

Yes mine is 84 as opposed to the normal it seems 68. Does the bike being an e bike make any difference

 

[volt x]

Do I just get a bracket and transfer the needed parts on to my axle. I'm not going to find anything near what I need. Going back to Volt will most likely mean having to buy the whole crank set at a huge cost.

 

[Sparksandbangs]

Do I just get a bracket and transfer the needed parts on to my axle. I'm not going to find anything near what I need. Going back to Volt will most likely mean having to buy the whole crank set at a huge cost.

Thought the Amazon link I posted earlier was pretty near. 5mm out. I could be wrong though. If someone else wants to confirm.

Bottom Bracket 1 Pcs MTB Bicycle Bottom Bracket 68*124 131 80*140 84*140 147mm Bicycle Central Bearing Axis Bike Parts For Square Tapered Crankset Square Taper Bottom Bracket ( Color : 84 140mm ) : Amazon.co.uk: Sports & Outdoors

Shop Bottom Bracket 1 Pcs MTB Bicycle Bottom Bracket 68*124 131 80*140 84*140 147mm Bicycle Central Bearing Axis Bike Parts For Square Tapered Crankset Square Taper Bottom Bracket ( Color : 84 140mm ). Free delivery and returns on all eligible orders.

www.amazon.co.uk

 

[volt x]

Thought the Amazon link I posted earlier was pretty near. 5mm out. I could be wrong though. If someone else wants to confirm.

Bottom Bracket 1 Pcs MTB Bicycle Bottom Bracket 68*124 131 80*140 84*140 147mm Bicycle Central Bearing Axis Bike Parts For Square Tapered Crankset Square Taper Bottom Bracket ( Color : 84 140mm ) : Amazon.co.uk: Sports & Outdoors

Shop Bottom Bracket 1 Pcs MTB Bicycle Bottom Bracket 68*124 131 80*140 84*140 147mm Bicycle Central Bearing Axis Bike Parts For Square Tapered Crankset Square Taper Bottom Bracket ( Color : 84 140mm ). Free delivery and returns on all eligible orders.

www.amazon.co.uk

There is one 84 / 147 at least one measure is good. 12 mm extra on the overall length. Is it too much Like you I don't know. The crunch is it's a very long wait to get it. I can see the 80 / 140 mm. I'm still toying with the notion of just get any piece and using the parts I need. which is everything bar the axle.

 

[Raboa]

The overall length of the spindle is 135 5mm, 86mm is the bottom bracket shell length, 29mm is the drive side exposed spindle length, 20.5mm is the non drive side exposed spindle length.
Bottom bracket shell width:

• 68mm: Commonly found on road bikes.
• 73mm: Typically used for mountain bikes.
• 83mm: Found on some downhill bikes.
• 100mm: Common for fat bikes.

You can take the cartridge bearings off a square taper bottom bracket and replace them (YouTube will have a video on how to do this).
I would contact the bottom bracket manufacturer and Volt.

 

[volt x]

The overall length of the spindle is 135 5mm, 86mm is the bottom bracket shell length, 29mm is the drive side exposed spindle length, 20.5mm is the non drive side exposed spindle length.
Bottom bracket shell width:

• 68mm: Commonly found on road bikes.
• 73mm: Typically used for mountain bikes.
• 83mm: Found on some downhill bikes.
• 100mm: Common for fat bikes.

You can take the cartridge bearings off a square taper bottom bracket and replace them (YouTube will have a video on how to do this).
I would contact the bottom bracket manufacturer and Volt.

I'd be wasting my time contacting Volt , saying this from experience. I've googled Feimin and can so far only find sellers selling their products. I've already amazoned a new bracket for the required parts. arriving tomorrow so hoping I can sort it out. I have a You Tube video saved for reference.

 

[guerney]

If useful: "FP-B917". No measurements, but there are various contacts, including a telephone number.

FP-B917 <strong>E-BIKE</strong >_Zhejiang Luobei industry and Trade Co., Ltd. FRYING PAN，Wok

FP-B917 <strong>E-BIKE</strong >-Zhejiang Luobei industry and Trade Co., Ltd. FRYING PAN，Wok

en.julonginc.com

 

[volt x]

If useful: "FP-B917". No measurements, but there are various contacts, including a telephone number.

FP-B917 <strong>E-BIKE</strong >_Zhejiang Luobei industry and Trade Co., Ltd. FRYING PAN，Wok

FP-B917 <strong>E-BIKE</strong >-Zhejiang Luobei industry and Trade Co., Ltd. FRYING PAN，Wok

en.julonginc.com

I've found their website but I'm not at all impressed. Only two measurements and not the ones I need. There is one E bike bracket but it looks weird.

I'm going with the piece I've ordered from amazon. Not the correct size but I'll take all the parts I need to put on my original axle.