Following instuctions in another post I wired a power on demand switch to my Giant Suede, which works very well bar a couple of mods that could do with resolving.
First problem , the switch when used provides full power, it is all or nothing, would adding in some thing like a rotary volume type control into the wireing before the switch allow me to dial in less power ?
Second, I fitted a click on/off switch which is less that ideal, so looking for a push button type that only stays on so long as you are pressing the button.
Mileage range on motor power is less than half of pedelec mode, is this due to the full power only effect?
Thank you
First problem , the switch when used provides full power, it is all or nothing, would adding in some thing like a rotary volume type control into the wireing before the switch allow me to dial in less power ?
Second, I fitted a click on/off switch which is less that ideal, so looking for a push button type that only stays on so long as you are pressing the button.
Mileage range on motor power is less than half of pedelec mode, is this due to the full power only effect?
Thank you