Yes thats how I feel as well.......the power delivery is far from subtle and is wasteful IMO. I want to exercise and add the power when i need it, not be hurled forward, where I feel my peddling is struggling and not contributing. Maybe I should have bought a pro connect.Frank, Yes I agree, it's very annoying when negotiating crowded cycle lanes, to find the machine surges forward resulting in using the brakes to check the speed. And of course, I am constantly aware of the waste of power this causes.
Just goes to show how each individual machine requires it's own riding technique to get the best from them.
Cheers
Bob
I think this is common to most of the powerful hub motor bikes, the eZee models very similar. The lack of fine control on Hall sensor throttles is partly to blame of course, and eZee's 9 position switched EAF control was one answer to that, though even with that, many just used it in a couple of positions like 5 and 9.Yes thats how I feel as well.......the power delivery is far from subtle and is wasteful IMO. I want to exercise and add the power when i need it, not be hurled forward, where I feel my peddling is struggling and not contributing. Maybe I should have bought a pro connect.
The wisper needs more R&D I think
Definitely interested in this! Please tell us more.The 2009 Wispers come with hi and lo range which can be retrofitted to existing bikes.
Not much good to us then.I assume the intelligence comes from the rider!
Interesting, David,Hi Guys
The 2009 Wispers come with hi and lo range which can be retrofitted to existing bikes.
The low is 20% and the hi 80% power, the beauty of this system when working in conjunction with the throttle is the 20% can be increased by simply gradually turning the throttle, this will have he effect of increasing the help from the motor up to 100% in 1% increments.
This is what our NZ means by cruise controll, his words not ours and I assume the intelligence comes from the rider!!
Regards David
Hi Frank,Interesting, David,
Why not take it to 100%? That is the problem with the pedelec system as it currently is - it doesn't give as much power as with the throttle. It doesn't sound like your new system adresses this.
On the original SE, of course, there is an easy if not completely safe solution, which is to fix the throttle permanently open and use the red button on the right to switch full power on and off as required. Before good old Jimmy England got to the bottom of the original pedelec wiring problems that is what I actually did, and the bike performed well, both in speed and range.
I would like to change by handlebars and the requirement for a twist grip is very restricting, a push and hold button would be much easier. Unfortunately the ideal handlebars haven't been found yet but I'll keep searching for something that won't obstruct my hallway so much.I think the ideal would be a "boost button" that took the power up to 100% but which was reset to off if the brakes were touched
Did Wisper ever make the hi/lo controller available for retrofitting to the 2008 905SE?The 2009 Wispers come with hi and lo range which can be retrofitted to existing bikes.