Hi I have a kt 35 kit on my bike.
last week i took it out in the snow on a very sleep hill clime and think i maxed it out.
bike stopped and lcd now always reads 0% and wont start.
when i tested the HALL sensors i was expecting to see 5v from the red and black but get 2.5 V.
i tried another controller and the same.
am i right in thinking there is a short or sensor problem in the motor ?
last week i took it out in the snow on a very sleep hill clime and think i maxed it out.
bike stopped and lcd now always reads 0% and wont start.
when i tested the HALL sensors i was expecting to see 5v from the red and black but get 2.5 V.
i tried another controller and the same.
am i right in thinking there is a short or sensor problem in the motor ?