Yes you have the correct female on the battery. The middle male deans is the wrong way round and you don't need the other female deans. You solder that (the male) directly to the controller and then you can plug the longer male pins into the female of the battery. Positive always goes on the bottom horizontal pin which you have correct. There are tiny - and + marks on the plug if you look closely.
This shows a male plug being soldered.
[video=youtube_share;xZU9rtACdZY]http://youtu.be/xZU9rtACdZY[/video]
Jerry
This shows a male plug being soldered.
[video=youtube_share;xZU9rtACdZY]http://youtu.be/xZU9rtACdZY[/video]
Jerry
Last edited: