The last bit of my project turned up (PSWPower 48V 350W Sine Wave Controller) and having installed it my bike runs “rougher” than with the previous square wave controller when below 12mph, above 12mp it is smooth.
It propels the bike fine, and the power levels are great (PAS 1= 100w – PAS 5 = 750w) which suit me fine.
Motor is a Bafang BFSWX02 hub and I have a 10AH battery, the controller is the KT-LCD6.
I am going to spend the evening going through the P+C settings but if anyone has any pointers I would be grateful.
It propels the bike fine, and the power levels are great (PAS 1= 100w – PAS 5 = 750w) which suit me fine.
Motor is a Bafang BFSWX02 hub and I have a 10AH battery, the controller is the KT-LCD6.
I am going to spend the evening going through the P+C settings but if anyone has any pointers I would be grateful.