Search results

  1. peter.c

    Scratched that tricycle itch

    THE UGLY NORMAL TRIKE BUT TOTALY PRACTICAL 250WATT FRONT HUB 27AH BATTERY MEGA RANGE
  2. peter.c

    Scratched that tricycle itch

    A FEW MORE PICS
  3. peter.c

    bbs01 programming changes not implementing

    That's what they did to the bbs01 250watt last year to:(
  4. peter.c

    bbs01 programming changes not implementing

    My 350 watt is set much the same except for higher% speeds on a few and lower on others bafang have changed the goal posts on the firmware several versions even with similar numbers and they will just not write any thing that might cause self destruct out of interest I found that the 750watt...
  5. peter.c

    New in the workshop a SECOND GO at a FULL SUSPENSION conversion

    Finished an test ride over:D:D:D:D:D:oops:;) conclusion the 48v 750watt bbs02 is the best for noise and efficiency, in both power and smoothness and overall delivery it peaked at 1100 plus watts:) but pulled 800w plus most of the time and the 48volt held up well but can see the advantage a...
  6. peter.c

    bbs01 programming changes not implementing

    Try setting the display in analogue watts mode I found this reacts quicker:eek: or my old brain takes more in :confused:on the specialized camber pulls full power right up to the mph cut off point set to 30mph and pulls up to 1100watts on a full 48v battery from a standing start:D but with...
  7. peter.c

    Battery shipment within the UK

    It is not legal to send by royal mail or parcel force both put them on the banned list our local post office has a big warning poster the postmaster should also ask the question what's in the parcel, some will allow company sales in a correctly marked and labelled box you could try calling...
  8. peter.c

    New in the workshop a SECOND GO at a FULL SUSPENSION conversion

    48V 14.5 AH from ali express with 750watt motor as a kit, would normally not buy a china battery pack but if I like the ride will swap to a 52v pack with ga cells going to make a ali bash guard
  9. peter.c

    New in the workshop a SECOND GO at a FULL SUSPENSION conversion

    Spent so much time to get the battery to fit in the frame did not notice the angle of the front tube:oops::eek: but a quick bit of metal work and mounting bracket completed :D no time for a test ride today;) and the brake cut outs to fit tomorrow the battery is on charge
  10. peter.c

    New in the workshop a SECOND GO at a FULL SUSPENSION conversion

    The bottom bracket is now out the mini pack battery is on the shelf just got to make a motor mount /bashguard going to be light weight :oops:
  11. peter.c

    Scratched that tricycle itch

    I tried a normal style trike first but without a rear diff the mid drive made it :oops:;):eek: this one took more thought time and finding parts than the actual build o_O The ride is surprising, more like a normal bike than a trike, lean and lift one front wheel to corner. The narrow track...
  12. peter.c

    bbs01 advice improving a high torque setting

    The settings I use are off road more than uphill, think trials bike yes it can get warmer [slightly] but the lower overall gearing was the aim. The motor is in the sweet spot and the power delivery is instant no bogging down the hardest part is getting the power down with out wheel spin
  13. peter.c

    Scratched that tricycle itch

    So I finally scratched that tricycle itch over the winter I rebuilt the old trike it turned into a full rebuild the only original bit left was the frame but soon got bored with it [sits in the corner of the garage ] Started to rethink the handling problem ended up with:eek::oops: 250watt...
  14. peter.c

    bbs01 advice improving a high torque setting

    On my off road bike I used the lekkie 36 chain ring and a 21 on the alfine 8 on the rear keep current is set to 95% and the first three settings on the pas [I use 9 levels ]are set to 100% current 20 amps [350watt] and 35 %/40% /50% of speed it tops out about 25mph but will climb all day...
  15. peter.c

    BBS01

    So it boils down to thrash a bbs01 and ring its neck and run it on its limit :(or get bbs02 500/750watt and push it hard:) or bbshd cruise gently higher torque :D
  16. peter.c

    BBS01

    Hi Jumpin I use Panasonic ga cells in my packs built by jimmy at insat I have several packs 17 ah and 21ah the main reason is uk based and good customer service fast turn round but it is a personal choice The bbs01 is another personal choice if you want to stay legal it means 250watt I...
  17. peter.c

    BBS01

    I am glad you have done that it saves me tomorrows job:) I suspect that due to failures of controllers under warranty a change has been made to all bbs01:( think of the heat of 18 /20amps in the motor if it bogs down and blows the controller :mad: that's why the bbs hd is a total different...
  18. peter.c

    BBS01

    Just checked the throttle on mine has less go I am wondering about setting to 100% current on the last 4 pas steps and just lower the speed on the levels and try another display