Search results

By the way if you are not careful you will wipe out the display and likely the controller as well if those bare wire connections short each other.

Hello Monov and welcome, One doesn't connect the throttle to the display, the controller should have it's own throttle connector, uusally wired red/black/blue. Red/white/black is for wheel spd sensor & brown/black/yellow for PAS. If you don't have the throttle wiring then it is likely not...

Matthews sticky out thing is just a piece of foam pipe insulation. On one of his rides the plod spoke to him after some knob in car reported him because of it. The thing is if folks think it is solid or will scratch there metal tin they will keep their distance so the illusion of it is...

No idea , very strange. All I can think is to disconnect the display and reconnect later on.

My Oxford cable one has lost 80% of the outer covering from UV deg, the s/s braided linked outer is nice and shiny, the lock is still a deterrent when used with others as it adds more security to get thru. For the price it looks and feels a good deterrent, quite a heavy chunky cable lock...

I now have two heavy duty D locks and this heavier duty cable lock, as has been said it is about deterring and passing/waiting scum should turn their attention to easier targets. I have no issue carrying the three locks if I need them as they go in the panniers , all my trips under 2 or 3...

D8veh you did miss out on a meal or two of onion rings or chips form Iceland Turns out the seller is using old pics of the lock, my one arrived yesterday evening and is the bronze secure model as shown in your pic. Both the packagoing and lock are marked. I won't miss out on a couple of...

Rear C of G is too high to be considered a stable cargo bike , ok with larger rear panniers. I still think Mike Burrows 8 freight is the best design low down C of G , would be immense if one could add a tow hitch. Someone had a BBS01 converted so one expects a tsdz would fit as well.

Not a pedelec or EAPC then.

P28A is a nice cell and a 25a rating not to be sniffed at. Other cells one could consider are; Sinowatt 30SP 15a rated , Sam 30Q gives 12% more run time though is some what dearer. For those on a tight budget then there are three cells that are under £2 a pop. Sinowatt 25SP 20A nearly as good...

You are looking at the wrong Foggy portal, for spends greater then £75 use the wholesale site where cells are cheaper. How else do you think I can build a battery using HG2 oe P42A for sub £100. Those P28A's one should be able to get for about £280 delivered.

#75. motor problem | Pedelecs - Electric Bike Community

Extra connections (unused) could be for a manner of reasons but in most cases aren't used. The two outside pairs are for discharging /connection of a generic two wire battery. The next pair of inner are sometimes utilised for on bike charging where the main battery charge point is inaccessible ...

If all is well and the pedelec gods are with you colour to coour will work first time, as said use a strip connector block to test before making permanent solder joints or using the original Hall or Phase connectors . For phase I dispense with bullets and use MT60 tri connectors , for the...

D8veh has beaten me to it. Check the 5v switching , that alone will tell you if one is faulty.

Agree, keep the motor cable connector and solder the controller end to the controller connector. Just like the suntour hub motor connector is different as well so the guys have to keep the cable connector and solder the new controller to the cable ends.

BlownMosfets.cdr (ebikes.ca)

Quite right AGS , I have just seen the pic you refer to. It is toast.

Yes motor windings are toast on one phase , even if you got it working applied power would be poor as that aprt of the winding will be demagnetised.

If a phase bullet has melted or overheated at the controller end then the hub should be ok , before coming to any terminal conclusions and worrying the op he needs to fault find first. If the controller it toast and needs replacing then it is an opportunity to upgrade all to a KT system for...