Search results

Interesting bikes, the Raleigh chopper is the second e conversion I have seen.

It's called karma for nicking the original intellectual rights from David Hon.

Looking at where that cable is breaking up, afaics it isn't anythng to do with the exit of the adjusing nut or the angle. I would be inclined to buy a better brake cable and s/s jag wires are pretty good.

Yep they sure are. They aggressively protect their nest within 10 - 30m and dessimate all insect life, esp honeybees. I have heard naby a case where fit people with no past history have reacted badly and die from one sting. Generally away from the nest they pose normally little danger. So far...

You may need to enter in to the C settings to ensure C11 parameter is 0 for the lcd to work. One has to depress the up/down pads within 5 secs of turning on to enter general settings then depress the pads to enter P settings and depress again to enter C settings. Afaik the Kt 880 is digital...

When it comes to lekky issues most shops won't have a clue all they will do is swap bits out if a dealer otherwise they are missing a trick by not having a knowledgable person to run simple diagnostics on simple hub motor bikes.

Taiwan cell producer Molicel have released their latest 21700 cell to the market. The P45b an improvement on the excellant P42a and a 9% increase, the P42a previously only having been on the market a little over 4 years. Lucky Goldstar aka LG. have released to the market their latest 18650...

One carry out resistance testing for the mosfets to look for a short. One should find out how via the forum search.

The way they are making a right mess of things, one can't see either being in the posts by years end. At the rate theor going thye may be lucky to servive by end of October.

Yes a detached cell would also give a smilar result if a group is playing up. I had the same issue/s with the vruzend kit and why I ditched it. With any battery which has an issue it does pay to use a wooden or plastic tool to gently pry up any buss bars to check for movement.

For the voltage imbalance one can simply charge to full and then disconnect the balance leads and let the pack sit for 24/48/72hrs and check the V's daily to see if any wander. If they do then the BMS isn't at fault, if they don't reconnect the balance and see if the cells drop over a similar...

I had no issue putting in my basket for delivery a moment ago. There are quite a few sellers who stock it on Ali, one will likel find it on ebay or Amazon.

Common port simply uses the same ouput for charge/discharge. For the hailong one will probably stick with seperate port.

£/$ near parity makes buyind stuff from china a bit more dearer. I was going to buy a AKM 75 before xmas but that is now on hold.

Some balance quite well and others are pretty aweful, like your one the worse ones don't do any balancing once a cell hits 4.2v. 30q cells also are known to be a bit erratic and self discharge, but in your case one expects the bms is the issue charging and leaving a bad imbalance. I use this...

Gear sensors are non supplied additional option.

The law is fine as it stands and needs no tinkering, it is quite simple !!! Anyone who want's an eapc/pedelec and to have the same rights as a normal push bike then simply forget about throttles, wanting more power and faster speed limits. Anyone wanting a throttle or options not covered by...

Buy quality JAG wire S/S cables. I use them for my gear shifters , quality exposed wire cables shouldn't have issues. If thye are rubbing and frayingis being cuased then there is a fitting issue, show us a pic or two of the cabke entry and wire damage.

Yes may well be the lcd4 and maybe not a big enough processor in side it, I found my one to be a bit quirky and for now have made a new headset/stem bracket and re-fitted lcd3 tight to the stem. Good news one is able to see a lower voltage with no cutting out, hopefully one will be able to take...

Tbh it is simpler to replace with a dual voltage or 48v controller, the mosfets may not be up to handling the extra heat. One is looking for the main inrush capacitor voltage rating situated next to the shunt. One can add solder up one side of the shunt to a max of 25% to increase current , so...