Search results

On ES there was a UK guy having a similar issue to mine, in that java jre would not open and he was getting blank screens or unable to connect to java. So my guess is that he had a similar thing to me and the PC op system not recognising or allowing the java to upload within. There were a couple...

Something has occurred but what ? I don't know as never had this happen in the years I have been using KT. How ever if the activation is via back peddalling, then a simple reverse face of the magnet disc will sort the issue out as currently the sensor is seeing a reverse polarity for some...

I don't think it matters, what does matter is riding above the set cut off speed so no battery power is drawn. I think what matters is that which your knees tell you when it comes to riding technique.

Ah well all good things come to an end or even not so good things. You will have to let us know what the reason is when you find it, could it simplt be battery lvc or evena fuse ?

If the battery is a simple generic two wire only connection then yes one can use any third party controller and display, but befor proceeding show us a pic of the motor cable connection. If the latter is a generic 9 pin Julet waterproof type connector then KT Keunteng are highly rated and one...

Amendment to post #390. It concerns the text regarding confirming the JAVA has downloaded correctly and I have underlined the edited part. Beg pardon for the incorrect entry. 2. The most important bit Download Java jre and check it is loaded and running on your pc. Download from Download Java...

The controller is lishui and yes the display will be a KM. It is usually only dealers who have access to the programming software. Do as CB has mentioned and see what the speed is with a fully charged battery, as volatge decreases so does speed so that may be where the issue lies as well as a...

A cyclist was left fighting for his life yesterday following a collision or being hit by an e-scooter yesterday at victoria embankment, the e -scooter rider wearing ahelmet stopped to see if the cyclist was ok then rode off. Police are looking for a eastern european man who was riding an...

If the wheel only works when PAS is activated by rearward pedalling then one has to change the magnet disc face around or the magnets. If the PAS worked ok before seems strange if it has changed and have never experienced it before with a KT. One can try a C10 restore of the system.

The specs are ideal with plenty in reserve so not to stress the cells with high current draw. If one constantly used the the 15a draw frome the battery via throttle or PAS 5 to 3.2v per cell then one can expect 2.5 hrs run time or approx 12.3ah from the pack as a whole. If one uses low PAS 1 or...

I use to use wired in lghts but for less wires I now simply use good usb lights.

If the bike is a hub motor drive and uses a generic type pas (magnet disc /sensor) then likely the issue is a fault with it. Usually the fault is easy to rectify and probably something has moved or been knocked out of position. The disc is located at/behind the front chain wheel or might be on...

Did the .co.uk bit not give the game away :D.

The fact you can grip the wheel and it makes that noise with the throttle applied is either a stuck clutch and the freewheel not engaging or the planet gears are stripped. Remove the wheel and open the motor to inspect.

Yes we need pics of what you have bought. You will need a multi meter for testing. If the batteries are old or have been left sititng a long time without use/maintenance then they may well be knackered/dead.

Most likey, generally as a a 99.9% oem supplier there stuff is very scarce on third party sites who sell such stuff, rarely some odd used one might turn up on ebay.

We don't discuss them on here as they don't concern us, though do get a mention as often idiots are seen riding them. Legality wise they have to be type rated and insured as a moped.

It's a lishui hmm, finding one will be near impossible. Your controller is 11 years old they have move on in that time and won't sell that type any more. It appears to be unsensored I doubt one will see many of them now. You will probably need to start again and replace the whole controller...

£280 probably isn't too outragious as they have to earn money, if one is handy then all the parts including a new controller is approx. £100. It sound like they can flash the controller with new firmware for cadence use. First confirm with a pic the motor cable connector to make sure it is a...

Now I have the downlaods working I need to get on with the motor and mechanical mods. Once done I will probably start a new thread as it will all get lost in this one. Yes I have flashed the new firmware and the stvp shows the characters have changed so looks hopefully all good obviously I...