Search results

Tern had a a few frames snap at the hinge on various bike types a few years ago, but expect they may have sorted the issues out now. Then I did see a pic gsd also with a bosch drive that also suffered a frame brake. I was nearly tempted by tern node d8 from tredz but decided against it.

Looks like shengyi brand.

If the polarity is the same then yes, the two extra polarity pins will either not be used or if wired are for on bike charging where the original charge point may not be very accessible on the battery. However some pics of the bases first would be a good idea so we can see.

The tsdz uses a std spider bcd so one should be able to find a spider/crank to suit.

Casainho took up the mantle as she originally started the v1 osf, the reason no more work has been done is she stopped all tsdz osf . Instead focused on the KT osf to work better with DD hubs and bespoke designed mini lcd displays , she simply found the tsdz to unreliable. In the future someone...

There is an Austrian e 8 freight type clone (made by Maderna) with just a larger rear flat low platform and an integrated pannier rack over the rear wheel and suspension but the design adds at least 8kg to the overall weight. The main reason for MB ceasing the 8 freight after 100 builds was...

The only single point that we do know as being std is a julet 9 pin motor sequence layout with all generic hub motors.

Jst/sm pin out sequence is only std in most cases with the same brand/seller. I have seen KT stuff from different sellers that not only have sequence differing but also M/F fittings, generally the sequence can be all over the place. It would be best if sellers simply supplied the jst connector...

The new firmware is anti OSF apparently and isn't programmable with current OSF releases, some of the 2021/22 tsdz2's have new different controllers then other tsdz2. Aikema (Suzhou) is the parent company of TSE (Suzhou), one won't find the tsdz2 on any of two companies pages.

On ebay they have several products.

Use the green OKO stuff the agri world uses for TL, it is said to last the life of the tyre and never sets.

I will find it and post a pic over the weekend, the motor wire is std 9 pin julet. I seem to remember it might not be a mxus clone but a Xofo xfv clone.

Yep.

If you want a 36v freewheel geared hub motor only I have a mxus (I think) new unused one boxed in the garage, £100 +p&p, it will need lacing and truing in to you rim.

Take your pic of motor and get it laced in to your rim here in the UK. ebike hub motor,front motor,24V/36V/48V motor,200-350W motor,500w motor for electric motor (topbikekit.com) [Wheel Only] BAFANG 36/48V 250/500W e-Bike Conversion Kit Rear Wheel Hub | eBay

Certainly use up or store all excess kw/h's generated or convert it to heat up the water, only a fool with solar panels will export it back to the grid for a paltry 5p per kw/h they give.

I needed to to go shopping today for cat food, so I made use of 15% discount at Sainsburys to stock up and to get cheap cat litter. The panniers compared to my previous ones are cavernous and being tall means when full and attached to my rack, the pannier top sits above my rear carrier by some...

Thread resurrection time. I have been looking for larger panniers for my shopping and was intrigued by one George Henrys last mention of the roll top 20l/25l ortliebs, after doing some homework I tried a couple of ebay bids on good used pairs except the bidding for them gets silly and one can...

:eek:, that should do the trick for refund voucher.

For me I charge to 4.15v even though I don't use the uart BMS, v.good cells should maintain pretty good balance without reaching the balance voltage. For me I build the battery in away I can access the bms balance wire connector for a manual check and single cell balance if needs be or wire in...