Search results

You have the wrong type of forks to fit a hub-motor. you need them with inboard drop-outs, but your are in the middle. There are a few solutions: 1. If you don't have suspension forks you can use a washer (12mm) or two. 2. If you have rim brakes, you can remove the screws and the spacer and seal...

On the website listing.

46 would be for a direct drive motor that doesn't have a separate speed sensor. Geared motors have 1 or 6.

He's trying to charge his 12v pressure washer battery that can't be lithium because it would have blown up by now charging it with a car battery charger! I've got to hand it to you guys, you know how to make a simple task difficult.

I used to buy throttles at 60p each from BMSBattery. Whenever I placed an order, I'd always add a few throttles and pedal sensors. Your type is now up to $4 and the cheaper ones are $3, which is a 250% increase from 6 years ago.

Good luck to you and all who sail in you.

You can't measure it unless your meter has a shunt in it and a separate socket for the probe. Even then, you'd have to make up a special lead with the jack plug on on end and a socket on the other, otherwise you have to cut your charger's lead. Although it's possible in theory, I've never seen...

During my investigation, I found this from August! https://www.businessinsider.com/usps-blockchain-patent-prevent-mail-in-voting-fraud-trump-attacks-2020-8?r=US&IR=T

I think there are other factors to consider, like how you sit on the saddle. I tried one on a normal MTB with slightly leaning forward position when I was 100kg. I guess it had the standard spring as it was a demo bike. It was absolutely perfect. In fact, I didn't really look at the bike...

Start by connecting the LCD, the battery, the motor and the throttle. make sure that all wires match colour to colour on each side of the connectors. Do all this before routing all the cables and tying them down. Next, switch everything on and test the motor with the throttle. If it doesn't go...

I don't believe nor disbelieve it. I wait for evidence. I have found this on several websites. It's not on the DHS website under press releases, but the explanation given is that it's only been released to some sort of press agency. My thinking at the moment is than Infowars wouldn't publish...

What do you reckon about this? He said that the voter fraudsters have been stung, the National Guard has been deployed and arrests are imminent. These people generally think it's a hoax: https://www.freerepublic.com/focus/f-news/3902491/posts

P07 should normally be 1. Anything else would give a more than 100% error. Some motors have 6 magnets, in which case you set it to 6 and each 1 you are away from that value would give a minimum 17% error. Magnets often fall off the motor, so if your speedo reading was 5/6 of what it should be...

Someone asked me to fix their Carrera Vengeance with Suntour HESC system showing E22 torque sensor mechanical problem. I took off the crank and cleaned the slots in the torque sensor and put it all back together. The sensor slots looked quite clean, so I'm not sure that's what's caused the...

There's no standard for it. the only thing i can guess is that the switched battery wire will be next to the battery wire. You can identify the battery one and the ground by checking continuity to the two battery terminals on the panel you unscrewed. With that panel connected and everything...

I don't know which is which. I can't even say what they all are because there are two versions of the 790 - analogue and digital. Using logic. I think the only possibility is that you have the digital version, so assuming that you don't have a throttle, I would guess that they're: Battery...

Sealed connectors like that makes it impossible to test. If your 790 panel comes apart (screws underneath), you can test in there.

and 2019 since that's when the bikes and LCDs would have been made.

When I was in hospital, there were a couple of guys dying of cancer. They were not allowed to go home because they were deemed to be too ill, and they weren't allowed any visitors in case they caught covid. The only thing they both wanted was to see their families before they died.

What about a law to say that you have to publish your tax return before you can post on a forum or other social media?