Search results

What currently activates the alarm ? How do you turn the alarm off ?

Red is the live feed and Black Gnd, the others must be for a relay via a key switch. Is it key switch set or remote sensor ?

Probably worth a punt, reviews are favourable for their better stopping power over cable brakes and better then avid bb5/7's and crappy promax, twin pad actuation so might be ok. The only worry might be the oil boiling in such a small calliper reservoir. They appear to be bleedable but tricky to...

Put a simple toggle or rocker switch on the feed wire.

Have to admit font size makes for more pleasant reading Chris, but what matters is what you are happy with.

Sprocket 't' size to approx. cassette gearing. 16t = 7/30t. 18t = 8/34. 19t = 9/36t. 20t = 9/38t. 21t = 10/40t. 22t = 10/42t. 23t = 11/44t. 24t = 11/46t.

Same model sg7001, no issues with fitting though all the ancillary parts have to be nexus/alfine compatible and the correct fitting kit for the wheel dropouts dependant if they are vertical or horizontal. Gearing jumps aren't equal and are fairly large. Apart from the hub it self one needs...

It won't just be e cars it will be all cars if pay per drive is bought in.

Yes it most probably is.

I'm running one bike with alfine8 and twist /revo shift much preferred over derailleur gears and smoother imv. The A8 came off an mtb with bbs01 and a double ring set up, still using a double ring set up with alfine tensioner. Drive motor is G370 front hub. I ignore the 2:1 ratio for gearing...

For good quality cells one will have to think of allowing approx. 300 - 380eu for a battery. Have a look at enerprof.de hard and soft packs with 21700 cells in 3p using the likes of the Molicel P42a or the Panny NCR2070C cell, both use higher rate discharge cells. 48V (13S) Batteries |...

I'm also looking at the tsdz for my cargo bike next year, for me usage is only local so a 2p or 3p 6- 9 ah battery is perfect. I know the 12s2p will suffice but will also look at 12s or 13s 3p with 2500mah 20/25a cells.

3s or 4s requires 15 or 20a rated cells, any cell chosen ideally one should be looking at 50/60% of the cell current rating for usage so as not to stress the cells. The top end current rating of a cell is ok for temporary use but even the very good cells will age quicker used nearer their top...

E cars have to come in to the equation sooner or later as ice car road duty is lessoning every year as more are taken off the roads and replaced by greener fuel cars. Problem is companies are very slow at introducing the new tech and only doing do thru being forced and driven by...

If there is an ebikesdirect outlet nearby, it may be worth popping in and asking regarding spares.

After years of running fixed lights off the bike battery, I have now gone to minimalist look and using my usb lights. I found a nice rear cateye usb rear light recently in the street and it has 5 light modes, a new rear mount for it (£5.99) and now have an extra one for my bikes and cargo...

Once the parameters are all sorted and the bike is working one can revert to the 880led if it is preferred and all will be ok, the advantage of the lcd4 is it is tiny/discreet and one has 5 current/PAS levels for better control. Also a voltage display which is one of the main benefits to use as...

I use the same lcd4 on my new Cotic Roadrat bike build and it has all the settings to change the parameters, any KT lcd will be compatible they are plug and play. One switches it on and within 5 seconds has to depress the up/down pads simultaneously for up to 10seconds then the basic values...

Bicycles won't be taxed, what will happen is electric cars will have to pay a road fund eventually or every one will pay per mile they drive. The tech for pay per mile can be integrated in to car electronics universally or done via the MOT via mileage recording annually.

The display pic in #10 is pointless as it isn't the same one you have in pic#1, all it does is muddy the water. Your one must have a connector pull it apart and count the pins, ultimately if one can trace the motor wire to the controller (likely in front of the battery compartment) see what...