Search results

Not if you look where you are going, it is other users who might hit you rather then the former.

My controllers are in a under slung top bar bag or in a under slung saddle tool bag, none have issues riding in the rain.

Yes if showing up as a fault then the controller is potted/siliconed so replacement will be simplest as it is a few years old.

It tells you if you scroll down the page 5v - 24v input so yes with 24v output.

If wanting the throttle option (highly likely) then speak with David or the Wisper team, the certification adds a little more to the bike cost but means you are 100% legal and don't need (unless you wish to ) have 3rd party insurance, use helmet or have to have it tested annually. With...

You will need a hub bike or a bike with cadence sensing and a throttle, a TS /torque sensing type drive whether center drive or hub drive will require good rider input to multiply the power provided. A cadence type system means you simply lightly turn the pedals and can practically ghost pedal...

With battery you are best not to go to sleep leaving it on all night, use a wall timer set for a 2 -4 hrs then finish charge off if needed when you wake up. How long a battery charges for depends on the capacity and the voltage SOC. It might not be anything to worry about, if they don't want...

:D :D.

They will want to see it has the CE mark on an official manufacturers label one would expect.

I used a double up front with BBS01 and a derailleur, the rear was alfine8 hub gears. The smallest ring you can fit is a 32 might be a 34.

As the controller is in the little compartment before the battery it will appear that the battery might be smoking, what occurs with reverse polarity of the wiring is you will have blown the inlet capacitor. If you open the controller you will find the large capacitor blown apart and fluff...

Below are the light's spec ,they have an integral buck converter. As vfr says wire direct off the battery/controller supply and run them off a switch and if you like an inline fuse. 985CS Features: 1. Power: 3 W 2. Input:DC 6 V-80 V 3. Brightness:5050 3 V LED >60 lux 4. Standard:Europe...

Yes best to keep the whole project within one thread.

I can make a suggestion but the use would be lost on you I suspect but here goes. My 36v battery which I no longer use now is used as a PSU to power my honey extractor now I have converted (it) my manual crank handle winding to a DC stepper motor control. I also use old lion batteries for...

Trace the tracks on the board from the blue phase input, it will likely be a three or four fets to a phase.

Certainly not 1kw DD hubs for Brighton's hills, a high powered 250w hub will deal with some of the steeper hills or a mid drive kit. Darren is the local kiddy who knows the terrain well so Brighton ebikes is the place to go.

The Blue phase if showing zero is a failed mosfet.

Go with your plan Cwah, buy the China friction drive and buy two small 100wh batteries power you intended light bike and tech gadgets via them. Other wise you won't get no where humming and arghing, you have never been shy of giving something a try so go for it. Looking at the Qiroll it won't be...

Hasn't used one but must have shares in them the way he keeps recommending them. Not forgetting this is a bloke who recommends puts rotors on backwards.

For throttle and 25mph it's easy buy a used moped and not ride an illegal bike conversion, for 25mph you need a very good battery and higher current then most bikes have. None of this comes cheaply.