Search results

I can't really say without testing anything. Ananda controllers are normally full of hard jelly stuff, do you can't even test in there.

Schwalbe Marathon Plus tyres are hard as nails. You won't get any problems with them. They're puncture proof, which is a big advantage, and they last forever.

It says 6mm off-set in the drawing (under the 38mm width between flanges).

The only difference is that you have to get the spoke length right for single-walled rims. You can use slightly longer ones, but then they poke up above the nipples and would puncture the inner-tube, but if you grind them flush afterwards, it's no problem.

Where did you check that?

Why should it be? It's designed for spokes isn't it? This one that I converted and rebuilt the wheels has the same motor and single-walled rims.

The Oxygen has the same LCD and the same settings, except the power settings are accessible all the time. There's no overlap because it's 3 levels of power and 6 levels of speed. Going by feel, it's something like 5 amps max for eco, 10 amps max for normal and 15 amps max for power. The...

Probably easier and cheaper to buy new spokes the correct length.

Using 145 mm as the spoke pcd and 42.5 mm between the flanges, my spoke calculator gives 237.8 for 2-cross. Because of the 5.6 mm off-set centre of the hub, you'll most likely have to off-set the rim, which would mean the exact spoke sizes are 238.4 mm and 237.4 mm; however, I always use the...

https://www.taiwantrade.com/product/e-kit-display-685442.html# I'm pretty sure that you have an Ananda controller. that's what Dapu used to use and it looks the same. Probably any Bigstone LCD will work.

The switch unit identifies the LCD as a Bigstone one, but the layout doesn't tie up with standard Big stone LCDs, so it's probably a special one for Dapu. In principal, they all work the same and they work independently from the rest of the electronics. They have 5 wires, normally: Red...

Even if he could get the mechanics sorted out, what's he going to do for a 36v battery?

That's really daft because it's a user setting that you'd want to change for different rides. What's the point of having three power levels if you can't change them? It would be a bit of a pisser if your new bike came set to eco.

It looks suitably meaty. When is it coming? One thing I noticed:Normally CST motors have a flat side-plate on the cassette side to minimise the off-set of the spoke flanges from the centre, but that motor has a double step. Is it a very narrow motor? How much are the spoke flanges off-set from...

If you want to solve the problem quickly and efficiently, do the tests that I suggested and answer the question in my last post. Forget about the motor. It can't work if you have no 5v., neither can the controller.

I thought this adjustment is in front of the code, not behind it. Can you confirm that?

P05 should be 1 if you want 5 power levels instead of 3 P06 is wheel size in inches. You can adjust in 0.1 steps. It affects the speed display accuracy. P07 = 11 is probably wrong. it influences how the speed is displayed. I can't tell you what it should be because I haven't seen inside your...

Still growing: https://www.washingtontimes.com/news/2020/jun/26/parler-topples-tech-tyrant-twitter-apple-news-app-/ Tommy Robinson now 104,000 followers Katie Hopkins 267,000 followers Trump was kicked off Twitch for Hate speech Sidney Powell's Twitter account has been suspended Stefan...

Ok. That means that its not enabled in the settings. There are a lot of different versions of software in these controllers, so don't worry if some of these things don't work. Long press the plus and minus buttons simultaneously to enter parameter setting mode. Short press the power button to...

Why not use a motorbike starter motor. They don't cost much: https://www.ebay.co.uk/sch/i.html?_from=R40&_nkw=honda%20starter%20motor&_sacat=0&rt=nc&_udhi=20