Search results

NYC did the bikes come supplied with the battery ?

Also now you have to be careful as Julet have bought out the Gen2 connector which is slightly longer and will not be compatible with Gen1.

You guys are jumping in feet first without asking questions first for compatibility, you can't mix and match controllers/lcd's between brands and expect them to work. They have different comm's protocols and software. Lishui are harder to get hold of and are of an OEM supply only thru third...

You have to either remove one of the connectors and fit an opposite compatible one or use an adapter as you linked to. You need to know whether the battery & controller connector is male or female and buy an adapter with the opposite male or female fitting. If unsure show us a pic of your two...

According to TBK it has a Yellow/Black connector for light out put.

https://www.ebay.co.uk/itm/DT83B-Mini-Pocket-LCD-Digital-Multimeter-Ammeter-Voltmeter-DC-AC-Ohm-Volt-Meter/193425567980?hash=item2d090ff0ec:g:P-EAAOSwl05emA06

Lets hope the batteries aren't 2010/2012 as well then or they might well be scrap.

Look and see if Plantex have something you like sweep back wise.

Not with out spending more money. There is one mod you may be able to carry out but might stress the battery, you can try a controller shunt mod by adding a bit more solder to the shunt. The shunt is a current resistor and by adding more solder to it you can get more current from the...

Not without confirmation of actual voltage read out, a meter is about £5 on ebay and we can direct/show you how to easily use one. Also a meter will indicate if the two battery connections that line up with the two bike prongs are actually showing voltage. It might also just be a fuse that has...

The two outer ones might be pack voltage +/- and the two middle ones charge voltage some bike allow charging in situ so when you connect the charger it is at the base near to where those connections are and uses the two inner ones for charging.

Use a meter and tell us the actual battery voltage reading not how many and what colour the led lights are. Also check the two battery connections that line up with two connections (prongs) on the bikes base plate and that the relevant battery connection have voltage on them. the reading should...

Which controller did you get in the end ?

Yes switch off and remove, most use either a car std car blade fuse or a micro blade fuse. Fit one that is the next rating up of the batteries discharge current other wise it will always blow.

Instinct for me is to grab the brake which is quicker then fumbling for an on/off button esp if I'm wearing gloves.

What type of connectors to the controller Vernon ?

They might be good but how can you recommend it when you have never tried it ?

Make you own kit up from components, we can help with what to buy.

The lock feed might need the Red & Black then a these may well be the primary power supply.

Battery fuse, if it holds a charge and the display doesn't come on. Either external fuse behind a rubber grommet affair or it might be internal which means opening it. A pic might help.