Search results

This is the thinnest pas disc you will find, the connectors you will have to cut off to solder and shrink the wires...

For commuting and pottering around unmade tracks you will find a rear hub more user friendly and reliable, it depends on facilities and time for freshening up at work when you get there. For off roading a mid drive is more suitable though some do use rear hubs as well. Best cheapish kit for hub...

We need to know which style of riding you are planning for.

Just list all your P & C settings for us look over, but generally they should be pre set.

I have had it once when I upturned after a puncture ( pre Gaadi days). A few pumps of the lever gets things back to normal along with gentle taping along the brake line or at home the lever can be applied with a strap holding it to allow air to rise.

4v when throttle is open is right, are you sure the connection is for a throttle ? Have you checked the closed position where on Signal /Gnd you should see 1v. Could it be for a speed sensor ?

No one using tubes needs to remove a rear hub wheel unless a tyre is being replaced, a Gaadi tube is the answer.

Who is Thanos ?

I see the bike has hub gears so is it a front hub drive ? If so disconnect the motor wire and reconnect it, make sure that it is aligned correctly and pushed in as a far as it can go. The connector should have a raised arrow marking alignment on both parts and a raised stop line where the...

On both sensors black is Gnd, Red/Brown are 5v and Yellow /Blue are signal. The sensor LED should only show an on /off signal as a magnet passes by it.

EBS wire is plugged together, disconnect it.

Show us a pic of the controller & PAS connector.

Likely the issue could be related to the PAS sensor so we will have to wait until you post pics to see if there might be an issue.

The sensor wiring doesn't always match the controller wiring so you need to have the correct sequence for them to have any chance of working, gnd to gnd , 5v to 5v and signal to signal. Plugging PAS in to throttle connection won't work as it expects to see a different type of signal. If unsure...

The world has changed since the Olympics and ebikes are here to stay (and are more commom place) and like all EV's they are the future of personal travel, to any sayer just shut them down and tel them to get with it and join in in the world with less pollution and CO2 . For a lot less then your...

Lucas is a reliable brand m mobility batteries for 36v. Size fit ? https://www.ebay.co.uk/itm/3-X-Lucas-12V-12AH-14AH-15AH-of-same-dimensions-Rechargeable-Battery-POWABYKE/223526256992?hash=item340b340160:g:7AkAAOxyJX1TFcqHJX1TFcq Or Yuasa are a good brand.

You will need mobility SLA (High drain)if using that chemistry and not motorcycle or alarm batteries. A mobility shop is a good source to look for them though bare in mind the price vs lithium type option I have shown as they will offer a slight weight saving and will provide much better power...

You could also remove the large battery holder and fit one of these lighter slimmer 15ah batteries that come with a charger in it's place for £170...

AN old thread which I found whilst perusing and tallies with every thing I have said.

The battery box contains 3 x 12v 12ah SLA batteries for 36v, after a few years uncharged/laying dormant they will be scrap so will need replacing, you can either replace with good quality ev high current drain batteries as used in mobility chariots or use a 36v Lithium ion battery. A pair of...