Search results

Hi All Ivw not touched an iron for years, I used to do a lot of very small PCB work with a pencil iron and some work with a standard iron for bike stuff, it struggled with the Blue EC5 connections, Iknow see most people are using XT60 or XT90 for bigger cables. Is there a reasonably priced...

Hi All No done a build for years (i think 10 years ago with a rear geared Bafang motor) and i'm amazed how much things have progressed and the kit now available! I have a Carrera Kraken 27.5" latest model/Hydraulic brakes and i'm looking to for rear wheel conversion with a 1500w...

Hi All It seems as if my LCD controller as mine has water ingress, it has ALWAYS had water ingress from the very first time it was rode in the wet (4 years ago)!! 48v/1000w Brushless. It has always managed to turn ON/OFF, allow 'some' control with always with condensation/water inside it...

Hi All I've been using my brothers 'cheapy' Chinese 48v(10/11Ah) bike for the last few months. Apart from having zero brakes and a rust bucket it's been fine !!! I put it on charge last night and it was still still dead/flat ? I do not have a Multimeter handy atm (all out on jobs) BUT i just...

Hi All Was just getting in from a ride and notice the 'control ring' which holds ON/OFF, +/-, SET buttons on my Kalkoff had moved/slpiied slightly so i adjusted it and have somehow pressed a 'combination' of buttons and i have lost ALL assist functions ? Everything else works fine, can scroll...

Hi Seen a few box's and dongles and want something easy and plug/play for when off road etc as i have actually became bored at standard max speed on the many of off road/smooth tracks near me. Just done a VERY random search and this popped up -...

Hi All Had a little accident on my Kalkhoff Endeavour Impulse S10 and i have snapped the RHS/front brake lever only ,the remaining unit on the bar still works fine if i push the 'plunger' in which is operated by brake lever arm as in pic,the small ball ended silver bit, no oil has escaped at...

Hi All Arm keeps coming loose, I tried a 9/16, 1/2, 13mm, and 14 mm. The 1/2, 13mm are too small to get over the nut, but the 14mm and 9/16 are too big and are in danger of rounding the nut out. I have ZERO clearance to get an adjustable in there, nothing gets a bite. What do I do...

Hi All After a couple of years my trusty 36v/20Ah Li-Ion battery is dying, it only getting to 36v fully charged, i have tried other chargers and checked output and its over 42v. It used to be 42v fully charged. This is the battery - https://bmsbattery.com/70-36v-li-ion Cheers

Hi All Have had a 36v/20Ah battery on my self build for around 20months and it initially charged to 42v. It is now only acheiving 36v after a charge and its dropping to around 34/35 whilst in use. Is the battery on its way out ? What will it cut out at ? Thanks

Hi All After getting my 36v/20Ah Bafang rear wheel going (carrera Kraken/thumb throttle) i am looking to sell it and upgrade to the above. Budget of £2500 plus they are doing £100 off for Autumn, plus i have can sell Kraken to a friend. I live at the top of a VERY steep hill so think it will...

Hi All Still getting around to sorting my electric bike out, fitting a new rear wheel BUT by the time i fit spacer washers/locking drop-out washer and torque arm there is only enough thread put 'half' the locking nut on !!! Is there any way around this or is it the norm ? This is the non -...

HI Could you tell me why the Kalkhoff Endeavour Impulse S10 XT is more expensive than the Kalkhoff Pro Connect Impulse 10 ? To me they both look the same ? Same battery, groupset etc ?? What would YOU recommmend.... Or would you advise another bike with around £2k-£2.5k budget ??? I will be...

HI All Seroiusly thinking of purchasing the above after failing miserably in trying to get my self build going !!!! I miss it so much and my patienvce is going and i just feel like purchasing a self built with crank drive (no more wires/spaces etc to mess about with when i get a puncture...

Hi All I have a had a Faultless Bafang kit with hall sensor wires which has been faultless UNTIL NOW !!! I had a blow out on rear rear, tyre came off rim, tube was wrapped around gearing/brakes etc BUT when i last left it (was still using bit of power to get me up hill) it was all good... I...

Hi guys Not been on here for a while and my trusty Bafang 201rpm code 10 motor is still going strong. I plan on making another for a mate and have specified a BAFANG BPM CODE 10 - 201 RPM - 26@ kit. They have replied back stating there is no such thing and told me to recheck mine has a 10...

Hi All Going to have a go at Lipo again as i have all the gear here, i ordered some leads but the colouring is as below - Is green the neutral and brown cell one and so on ? What is the standard ? Cheers

Hi All Need to set up a word document to print A3 with box's containing text. I have a template/example BUT its pics i have taken as the original file has gone missing. Can a kind soul out there spare 5 mins to give me a hand ? I email the pics of what i need. Thanks in advance.

Hi All Since i'm on here thought i would ask this, i currently have a Bafang BPM code 10 26" rear kit, with a 36v/20Ah battery. Would i gain anything from either of these - Bafang CST 36V 500W REAR Driving E-Bike Motor Wheel - BMSBATTERY - Comes with choice of controllers ? or this...

Hi All Just done small trip to shop and got no pedals at the moment due to derailler so ALL on motor. Came back up a moderate hill as usual and then my steep hill of about 5m (which i usually pedal assist up) and it was if the back motor jammed up, felt the supply cable to motor and it was...