Search results

Pics are the way fwd to show us that which you already have. Higo & julet look similar and mate perfectly well, issue is they are incompatible as the wiring sequence isn't the same .

One will need a spoke wrench to fit new spokes so why not simply remove a good one to measure it ?

If he has had a fiddle with the display , he has likely disabled the throttle. One usually has to depress the +/- for 10 secs or so to enter in to the settings.

Brake sensors won't prolong motor life but may save the controller from failure if one has a throttle short or terrible motor over run.

Brake sensors may be needed for crappy systems that have over run or if one has throttle that shorts. I had brake sensors on two early systems because of over run , one was lishui and the other BBS01. I soon after those two found the KT 's and haven't needed them since.

I see the dearer £26/£27 ones claim 2hrs recording vs 75mins for the cheaper ones.

Use the search area of the forum for mosfet testing , their will be many entries posted by myself and saneagle . If one of the mosfets is shorted the oine has found why the bike doesn't work.

With a KT one wouldn't need them , the instances mentioned with a KT would not need sensors . KT has instant stop with no run on .

Brake sensors may be needed on systems with speed control or a bike that utlises a thottle, otherwsie they aren't pearticularly needed. At most one only needs one sensor operational on the rear brake. When I had my BBS 01 I removed them as found them not necessary at all. With my KT I simply...

Connect everything up and apply the walk assist , if that works then the controller and lcd are fine. If not then one needs to apply fault finding. One thing at a time. Mosfet test next if walk assist doesn't work.

One will need to carry out various tests/fault finding to find an issue.

If someone wants a throttle them so be it and they can have one, it's not the end of the world and tbh no one will be stopped that often if at all. If a certain topic irks you simply don't reply rather then sounding like a stuck needle on a record, no one cares about your views or whinging.

Buy a battery with v.g cells it will last many years and perform likewise. My 2.5 diy bottle battery with HG2 3000mah cells is only 6ah but easily manages 30 miles/50km with 35- 40% remaining.

Simple answer yes for a very short while , logical answer no unless you like peddaling with no power. I can tell you BBS01 is a POS to pedal unpowered for more then a mile or two, it is bad enough going a couple hgundred yards.

The bike is an Amazon bike so will be basic speed control system. There isn't much info on the net about them. Going on the info given regarding the older model have a look at the brake levers to check they are seated back correctly . If one can trace the brake cut off wiring back to the main...

If one has L settings then L3/0 will activate non -Hall mode .

Yep manage your own money and do the homework and you might get lucky . Don't let someone else like an IFA live off your money. I dabble 5% of my portfolio in the high risk US penny stocks (which generally are stocks under $5). Current portfolio down by 2k some have tanked but one back in May I...

Remember though that balancing is very slow approx. 100ma rate and voltages quite close.

Hollow tech simply need a BZ10C.

It's been answered in the other thread by Daniel. If it has been mounted correctly and the sensor /magnet gaap is about 1mm C1/5.