Search results

41.1v is a bit low is could be out of balance or on it's way out, lets see voltage wise what happens over night.

My last order placed just in March took a good 4 weeks to arrive probably due to the Covid 19 but things have settled a bit since then and might be a bit speedier now. Log in to your TBK account to keep an eye on the order status once it moves to sent you should get it in about 4 days, DHL will...

The motor wattage doesn't have an affect on the bike power output, it is the controller that matters. Yours indeed is 22a rated max, if you are seeing 700w in PAS1 then it must use speed control over current control. If you have ever tried it does each assist level have a differing max speed set ?

West Wales probably means hills so a 201rpm hub or even a higher torque one. If solely only buying a hub and spec'ing the electronics your self then a Akiema 100cst hub if you want legal 250w marking or the Akiema 128c or 128h if you aren't bothered. The other option is the TDsz from Woosh with...

I only know of the KT's which can have their current toned down by the user other's like Lishui can be programmed by a dealer if the controller has a data cable.

If you want a high power motor at least get one that looks like it will easily pass as a 250w model.

The hard cases don't particularly look great or conceal wires much.

Consensus seems to be that the Tonghseng tsdz 48v from Woosh is a better mid drive then the Bafang or fit a good rear hub/ kit.

Hub motor's doesn't use cone and nut bearings the disc side one is a press fit sealed bearing which has a rubber dirt seal and washer, the inboard hex nut is mainly to keep the axle motor assembly in place but does act in keeping the rubber seal/washer in place against the bearing face. I have...

For the C1 05 - 07, I think might be down to the signal strength input. if it works leave it .

What is the controller current rating ?

Even then if public have legal access to transit or enter said land then it can't be defined 'Private land' for off roading, like a footpath or bridleway.

If you want 17a controller from Aliexpress for a bit more power then you will have to change the brake levers as only 3 pin ones appear to be available. Postage and duty free. Controller WP. https://www.aliexpress.com/item/4000990498733.html?spm=2114.12010612.8148356.8.13f32edeZX730t Display...

You can reuse the brake, PAS connection & motor cable. The Red brake connector only available with 15a KT controller. Items you will need to buy. 15a KT controller with WP connectors...

Level 1 is low current draw so if the battery cut's out at that level then it is in poor shape,

My controllers are in bags either behind the seat or tringle/cross bar slung type, the seat ones I add extra vent holes for air flow and the triangle type I use extra heat sinks for heat dissipation. Using 9 fetters helps.

Motor bolts might need torqing up.

The Julet connectors that you currently have are water proof as will be the ones on a new controller your best option is a 6 mosfet KT 17a controller with Julet connector and a new screen, the julet connectors use a standard wire sequence so the PAS . What colour is the julet connector for the...

PAS = Pedal assist sensor. I assume although a hand bike a PAS set up will still be used as well as the throttle. With PAS use what assistance level do you use when it cuts out ?

Grease will be a magnet for all the junk and dirt around. Liquid grease would be better and cheaper option then the snake oil stuff all sundry sell just for the sake of lubing a chain...