Search results

The rear gear cluster is a screw on freewheel, your existing nine gears are a cassette/freehub this simply sits on a splined hub body with a screw on end that's keeps all in place. The brake cut out if required can be modified to fit by removing the wired sensor and a bit of imagination. If not...

I will mention it again the Bosch drive bikes don't allow or cater for a throttle whether pre or post 2016), being a German brand they comply with most EU law countries throttles are illegal. It is only the UK where we have a our own laws where under certain circumstances one is allowed...

Problem I see it with the law is that tech Zombies have lost any common sense they possess and are not wholly accountable for their actions, instead that accountability is transferred to the other road users where blame if possible is attributed.

Yes as Mike say's pre 2016 stand alone throttle is allowed post 2016 pedal activated f. The post option is not so bad, it prevents accidental throttle op and only a partial light pedal rotation is required to activate the throttle.

As a car driver you would likely not be blamed as we live in a car fuelled society, though undoubtedly police investigation would only add to your nerves/feelings above that you would have felt if the pedestrian was harmed. For a car drivers part the law is likely to side with them if no wrong...

Maybe a wheel speed setting is wrong ?

Go 48v if starting from scratch, consider the TSDZ2 if you want a bit more exercise over a hub, hub will give a more relaxed ride as you don't always need to be in the correct gear and can simply apply more current /torque by upping the assist/ PAS level. Mid drive slightly easy to fit low...

The Crosspath and Crossfuse are both Bosch so no throttle option.

You can use a throttle is if it is not stand alone use, that means pedal to activate it first then when you release the throttle you have to pedal again first.

Her compo out of the 100k claim is about £4,160, the rest goes to the claim mob. Money for old rope for them.

I have other KT's so will try another controller otherwise the BBS01 will go in the spares bin. Woosh no longer sell the GSM as production has ceased so only other option is to put up with a integrated controller like TDSZ or wait and see what the Gospade offering is like.

The BMS often takes it's power from the first or more often the last cell group, if it utilises a switch then this group doesn't get balanced without the battery being switched on. If a battery has a switch use it to make full use of the BMS functions, if you battery is out of balance which...

The controller is not configured to use a lcd so no way to add one. The throttle 3 spd switch is analogue. The lcd3 you have bought will need a KT sine wave controller if you want it to work, also it doesn't look like you have PAS so you will need a 10 or 12 pole PAS/disc sensor to go with the...

Depending on the drive gear used simple method is remove chain from derailleur and place said chain on front and rear largest gear, when taut the chain should have 1 extra link for Sram or two for Shimano where the ends cross.

Parcel delivery overland is still strict, parcel need labelling correctly and battery securely packed and protected even then as a private seller you may run in problems. Bike sellers and battery sellers will have some type of contract/agreement with couriers and follow strict EU reg's.

How are you going to post them ? Non of the big boys will touch them if you tell the truth and declare they are lithium.

KT stuff is pretty good as is Bafang hub or copy hubs, so you are doing the kit on the bike a bit of injustice. I have use these for years on most of my bikes without much issue. If to works on the push switch then PAS is the issue and usually not the controller. The sensor you correctly...

Irwin Mitchell ? I'd donate a tenner to the guy if there was giving page.

Green bike kit are good and reliable I have used them a few times, as with most from China it's the p&p that bumps the cost up.

If wireless the sensor can't transfer the signal if the battery is flat,